GB/T 10478-2017
液化气体铁路罐车
Railway tank car for liquefied gases
2017-10-14
BS EN 12561-3-2011
Railway applications. Tank wagons-Bottom filling and emptying devices for gases liquefied under pressure
铁路应用 坦克车 压力液化气体的底部填充和排空装置
2014-12-31
UNE-ISO 8310-2005
Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples
冷冻轻烃流体液化气体罐内温度的测量电阻温度计和热电偶
2005-06-22
UNE-ISO 8309-2005
Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Electrical capacitance gauges
冷冻轻烃液体液化气体储罐液位的测量电容计
2005-06-22
UNE-EN 12561-3-2004
RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE.
铁路设施.罐车.第3部分:在压力下液化气体的底部填充和排空装置
2004-03-18
UNE-ISO 13689-2005
Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge.
冷冻轻烃液体.液化气体罐中液位的测量.微波式液位计
2005-06-15
UNE-ISO 10574-2005
Refrigerated light-hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Float-type level gauges
冷冻轻烃液体液化气体储罐液位的测量浮子式液位计
2005-06-29
BS ISO 18132-3-2011
Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges-Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
冷冻碳氢化合物和非石油基液化气体燃料 自动油箱压力计的一般要求
2012-01-31
KS M ISO 18132-3(2017 Confirm)
냉각 탄화수소 및 비석유계 액화가스 연료－ 자동 탱크 액위계에 대한 일반 요구사항－ 제3부：액화석유가스 및 액화화학가스 운반선 및 부유식 저장 설비에 대한 자동 탱크 액위계
冷藏烃和基于非石油液化气的气体燃料 - 第3部分 - 的自动罐压力表一般要求:上板海洋载体和浮式储存液化石油气自动罐压力表和化学气体
2012-12-14
KS M ISO 18132-3(2022 Confirm)
냉각 탄화수소 및 비석유계 액화가스 연료－ 자동 탱크 액위계에 대한 일반 요구사항－ 제3부：액화석유가스 및 액화화학가스 운반선 및 부유식 저장 설비에 대한 자동 탱크 액위계
冷冻碳氢化合物和非石油基液化气体燃料.自动罐式压力计的一般要求.第3部分:船用运输船和浮式储存装置上液化石油气和化学气的自动罐式液位计
2012-12-14
ISO 18132-3-2011
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
冷冻碳氢化合物和非石油基液化气体燃料——自动液位计的一般要求第3部分:海运船和浮式储油船上液化石油气和化学气体的自动液位计
2011-08-02
BS 08/30184280 DC
BS EN 12561-3. Railway applications. Tank wagons. Part 3. Bottom filling and emptying devices for gases liquefied under pressure
英国标准EN 12561-3 铁路应用 坦克车 第三部分 压力液化气体的底部填充和排空装置
2008-09-16
GOST R 58029-2017
Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С ДО -165 °С. Часть 4. Изоляционные компоненты
设计和制造现场建造 垂直 圆柱形 平底钢罐 用于存储工作温度在0 $ 0DC至-165 $ 0DC之间的冷冻液化气体 绝缘部件
UNE-EN 14620-1-2008
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第1部分:总则
2008-06-11
GOST R 58027-2017
Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С ДО -165 °С. Часть 1. Общие положения
工作温度在0°C至-165°C之间的冷藏液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造 第1部分 总则
UNE-EN 14620-2-2008
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第2部分:金属部件
2008-04-23
UNE-EN 14620-4-2008
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
工作温度在0°C至-165°C之间的冷冻液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造第4部分:绝缘部件
2008-10-29
UNE-EN 14620-3-2008
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第3部分:混凝土构件
2008-10-29
DIN EN 14620-4
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
用于储存工作温度在0°C至-165°C之间的冷冻液化气体的现场建造立式圆柱形平底钢罐的设计和制造.第4部分:绝缘部件；德文版EN 14620-4:2006
2006-12-01
GOST R 58032-2017
Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С до -165 °С. Часть 2. Металлоконструкции
工作温度在0°C至-165°C之间的冷藏液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造 第2部分 金属结构