现行 JB/T 10307-2021
机床接插器件 机床接插器件 Plug socket-outlets equipment for machine tools
发布日期:2021-03-05
实施日期:2021-07-01
分类信息
研制信息

归口单位: 全国金属切削机床标准化技术委员会

起草单位: 北京第三机床电器厂、 苏州电器科学研究院股份有限公司、 罗克韦尔自动化(中国)有限公司

起草人: 李芬芬、 胡德霖、 王俊峰、 刘亚芳、 李杰、 陈义海

标准简介

本标准规定了机械设备用接插器件基本性能和要求,包括:术语、特性、正常工作和安装条件,结构和性能要求,特性和性能的验证等。本标准适用于额定电压交流50Hz或60Hz,1000 V及以下或直流电压至1000 V,额定电流不超过250A的各种工业机械动力电路与电源或控制电路与主机之间连接用的带防护等级、保护接地、接触顺序和防误插要求的插头座。注:如果采用插头座作电源切断器件,可与制造厂协商

相似标准/计划/法规
DIN 14691
Firefighting equipment - Multipole plug-in connection - Plug connector, coupler, socket-outlet
消防设备.多极插入式连接.插头连接器 连接器 插座
2014-03-01
BS PD IEC/TS 62735-1-2015
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices-Plug and socket-outlet system for 2,6 kW
安装在数据中心和电信中心办公室的信息和通信技术(ICT)设备的直流(DC)插头和插座
2015-09-30
BS PD IEC/TS 62735-2-2016
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices-Plug and socket-outlet system for 5,2 kW
安装在数据中心和电信中心办公室的信息和通信技术(ICT)设备的直流(DC)插头和插座
2017-01-31
GB/T 38428.2-2021
数据中心和电信中心机房安装的信息和通信技术(ICT)设备用直流插头插座 第2部分:5.2 kW插头插座系统
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices—Part 2: Plug and socket-outlet system for 5.2 kW
2021-10-11
IEC TS 62735-2-2016
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: Plug and socket-outlet system for 5,2 kW
安装在数据中心和电信中心办公室的信息和通信技术(ICT)设备用直流(DC)插头和插座第2部分:5.2kW插头和插座系统
2016-12-14
IEC TS 62735-1-2015
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: Plug and socket-outlet system for 2,6 kW
安装在数据中心和电信中心办公室的信息和通信技术(ICT)设备用直流(DC)插头和插座第1部分:2.6kW的插头和插座系统
2015-08-28
DIN IEC/TS 62735-DRAFT
Draft Document - D.C. plugs and socket-outlets for ICT equipment installed in data centres and telecom central offices (IEC 23/670/CD:2014)
文件草案——数据中心和电信中心办公室安装的ICT设备的直流插头和插座(IEC 23/670/CD:2014)
2014-11-01
GB/T 38428.1-2019
数据中心和电信中心机房安装的信息和通信技术(ICT)设备用直流插头插座 第1部分:通用要求
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices—Part 1: General requirements
2019-12-31
DIN VDE 0620-101
Plugs and socket-outlets up to 400 V 25 A; flat non-wirable two pole plugs, 2.5 A 250 V, with cord, for the connection of class-II-equipment for household and similar purposes; german version EN 50075:1990
高达400 V 25 A的插头和插座;带软线的2.5 A 250 V扁平不可布线两极插头 用于连接家用和类似用途的II类设备;德文版EN 50075:1990
1992-05-01
IEC 62196-6-2022
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离
2022-04-22
机床器件

最后更新时间 2025-09-02