现行 JB/T 8749.1-2022
调压器 第1部分:通用要求和试验 调压器 第1部分:通用要求和试验
发布日期:2022-10-20
实施日期:2023-04-01
分类信息
研制信息

归口单位: 工业和信息化部

标准简介

本文件规定了调压器和稳压器的通用要求和试验。 本文件适用于额定电压为 10kV 级及以下、额定频率为 50Hz 的感应式、接触式(包括环式和柱式两种铁心型式)和磁性式等调压 器及以调压器为主体的稳压器的制造,额定电压为 10kV 级以上的其 他频率或其他类型的调压器的制造可参照使用

相似标准/计划/法规
GB/T 43941.1-2024
星地数据传输中高速调制解调器技术要求和测试方法 第1部分:调制器
GB/T 27698.1-2023
热交换器及传热元件性能测试方法 第1部分:通用要求
GB/T 19212.15-2016
变压器、电抗器、电源装置及其组合的安全 第15部分:调压器和内装调压器的电源装置的特殊要求和试验
Safety of transformers, reactors, power supply units and combinations thereof—Part 15: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
2016-08-29
YY/T 0734.1-2018
清洗消毒器 第1部分:通用要求和试验
Washer-disinfectors—Part 1:General requirements and tests
2018-11-07
GB/T 19212.1-2023
变压器、电抗器、电源装置及其组合的安全 第1部分:通用要求和试验
Safety of transformers, reactors, power supply units and combinations thereof—Part 1: General requirements and tests
2023-09-07
YD/T 2379.1-2019
电信设备环境试验要求和试验方法 第1部分:通用准则
Environmental test requirements and test methods for telecommunication equipment Part 1: Common rules
2019-11-11
UNE-EN 13199-1-2001
PACKAGING - SMALL LOAD CARRIER SYSTEMS - PART 1: COMMON REQUIREMENTS AND TEST METHODS.
包装.小型载货系统.第1部分:通用要求和试验方法
2001-04-19
EN 13199-1-2000
Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods
包装 - 小载重系统 - 第1部分:通用要求和试验方法
2000-07-19
ETSI EN 303 345-1
Broadcast Sound Receivers; Part 1: Generic requirements and measuring methods
广播声音接收器;第1部分:通用要求和测量方法
2019-06-01
YY 0792.1-2016
眼科仪器 眼内照明器 第1部分:通用要求和试验方法
Ophthalmic instruments—Endoilluminators—Part 1:Requirements and test methods
2016-03-23
ISO 19709-1-2016
Transport packaging — Small load container systems — Part 1: Common requirements and test methods
运输包装 - 小载荷容器系统 - 第1部分:通用要求和试验方法
2016-11-18
GB/T 43326.1-2023
抛雪机 安全要求和试验方法 第1部分:术语和通用试验
Snow throwers—Safety requirements and test methods—Part 1: Terminology and common tests
2023-11-27
QX/T 10-2002
电涌保护器 第1部分:性能要求和试验方法
2002-07-10
QX/T 10.1-2018
电涌保护器 第1部分:性能要求和试验方法
Surge protective devices-Part 1: Performance requirements and testing methods
2018-11-30
GB/T 31465.1-2015
道路车辆 熔断器 第1部分:定义和通用试验要求
Road vehicles—Fuse-link—Part 1:Definitions and general test requirements
2015-05-15
GB/T 5338.1-2023
系列1集装箱 技术要求和试验方法 第1部分:通用集装箱
Series 1 freight containers—Specification and testing—Part 1: General cargo containers for general purposes
2023-05-23
UNE-EN ISO 11608-1-2001
Pen-injectors for medical use - Part 1: Pen-injectors - Requirements and test methods (ISO 11608-1:2000)
医用笔式注射器第1部分:笔式注射器要求和试验方法
2001-11-14
KS P ISO 11199-1
양팔조작 보행차 — 요구사항 및 시험방법 — 제1부: 워킹 프레임
双手操作的助行器——要求和试验方法第1部分:行走架
2024-12-20
GB 17498.1-2008
固定式健身器材 第1部分:通用安全要求和试验方法
Stationary training equipment - Part 1: General safety requirements and test methods
2008-12-30
GB/T 11313.1-2013
射频连接器 第1部分:总规范 一般要求和试验方法
Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods
2013-11-12
试验

最后更新时间 2025-09-02