GB/T 3098.22-2009
紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱
2009-10-15
GB/T 16938-2008
紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件
Fasteners - General requirements for bolts,screws,studs and nuts
2008-08-25
HB 1-218-2011
螺栓、螺钉和螺桩技术条件
General specification for bolts,screws and studs
2011-07-19
QJ 2397.1-1992
黄铜及铝合金螺纹紧固件技术条件 螺栓,螺钉和螺柱
1992-03-24
UNE 17077-1980
SCREWS, BOLTS AND STUDS. THREAD RUN OUT.
螺钉、螺栓和螺柱 线用完了
1980-12-15
ASME B18.2.8-1999(R2017)
Clearance Holes for Bolts, Screws, and Studs
螺栓、螺钉和螺柱的间隙孔
1999-01-01
SAE AS3063C
Bolts, Screws, and Studs, Geometric Control Requirements
螺栓、螺钉和螺柱 几何控制要求
2019-02-26
GB/T 35478-2017
紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification
2017-12-29
GB/T 35480-2017
紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
2017-12-29
GB/T 3103.1-2002
紧固件公差 螺栓、螺钉、螺柱和螺母
Tolerances for fasteners--Bolts，screws，studs and nuts
2002-12-05
JIS B 1009-1991
Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts
螺栓、螺钉和螺柱通用螺栓的公称长度和螺纹长度
1991-01-01
DIN 962
Bolts, screws, studs and nuts - Designations, types and finishes
螺栓、螺钉、螺柱和螺母.名称、类型和表面处理
2013-04-01
GB/T 3098.1-2010
紧固件机械性能 螺栓、螺钉和螺柱
Mechanical properties of fasteners - Bolts,screws and studs
2011-01-10
KS B 1065(2020 Confirm)
수나사 부품－호칭 길이 및볼트의 나사부 길이
螺栓 螺钉和螺柱-公称长度andthread一般用途螺栓长度
2015-12-31
JIS B 0143-2013
Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions
紧固件螺栓、螺钉、螺柱和螺母尺寸符号和说明
2013-01-01
BS EN ISO 888-2018
Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度
2018-07-11
DIN 34803
Split pin holes and wire holes in bolts, screws and studs
螺栓、螺钉和螺柱的开口销孔和线孔
2001-11-01
BS EN ISO 225-2010
Fasteners. Bolts, screws, studs and nuts. Symbols and descriptions of dimensions
紧固件 螺栓、螺钉、螺柱和螺母 尺寸符号和说明
2012-04-30
BS ISO 888-2012
Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度
2012-05-31
KS B 1008(2023 Confirm)
볼트의 분할핀 구멍 및 철선 구멍
螺栓、螺钉和螺柱的开口销孔和线孔
2008-06-03