TB/T 3456-2016
动车组用截断塞门
Cut-out cock for EMU/DMU
2016-09-30
TB/T 3003-2013
机车车辆用截断塞门
Cut-out cock for locomotive and rolling stock
2013-02-20
TB/T 1133-1999
折角塞门
1999-11-26
TB/T 3217-2009
机车用半球型折角塞门
Semi-spherical angle cock for locomotive
2009-08-28
JB/T 20088-2021
中药材截断机
Medicinal material cutting machine
2021-04-19
T/ZZB 3620-2024
环形线单晶硅棒截断机
2024-02-15
JJG (机械) 70-1992
冲击截断时间测量仪检定规程
JB/T 13886-2020
危险液体储运罐箱用安全截断底阀
Safety shutoff footvalve for storage and transportation tanks of dangerous liquid
2020-04-16
TB/T 2698-2009
铁道车辆用球芯折角塞门及组合式集尘器
Ball angle cock and combined dirt collector for rolling stock
2009-08-28
SME MS94-215
Application Of Truncated Petri Nets To Multi-Robot Operations
截断Petri网在多机器人操作中的应用
1994-06-01
ASME STP-PT-046
Review of Safety Considerations for Natural Gas Pipeline Block Valve Spacing
天然气管道截断阀间距安全注意事项综述
2011-09-12
GOST 18928-1973
Пробки резьбовые с укороченным профилем для трубной цилиндрической резьбы диаметром от 4" до 6". Конструкция и основные размеры
用于管道圆柱形螺纹的截断螺丝塞规 从4“至6”公称直径 施工和基本尺寸
GOST 18932-1973
Кольца резьбовые с укороченным профилем для трубной цилиндрической резьбы диаметром от 4" до 6". Конструкция и основные размеры
从公称直径4“至6”的管状圆柱螺纹的螺纹环规中截断 施工和基本尺寸
ADS RS444
Dimensions.of Threads, not included in B.S.2779 (5/16" & 7/16" Pipe Diameters, Special Truncation)
尺寸 B.S.2779中未包括的螺纹（5/16英寸和7/16英寸管道直径 特殊截断）
1977-07-01
SAE J2244/1_200712
Connections for Fluid Power and General Use--Ports and Stud Ends With ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing
用于流体动力和一般用途的连接 - 带Iso 261螺纹和O形密封件的端口和螺栓端 - 第1部分:带有O形圈密封的端口在截断外壳
2007-12-21
EN ISO 6149-1-2022
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
液压传动和通用连接件ISO 261米制螺纹和O形密封圈的端口和螺柱端第1部分:O形密封圈用带截断外壳的端口
2022-06-29
ISO 11926-1-1995
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第1部分:截断壳体中带O形密封圈的端口
1995-04-20
UNE-EN ISO 6149-1-2008
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)
液压传动和一般用途的连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第1部分:带O形密封圈的截断壳体的端口（ISO 6149-1-2006）
2008-10-01
BS 09/30199057 DC
BS ISO 11926-1. Connections for general use and fluid power. Ports and stud ends with ISO 263 UN and UNF threads and O-ring sealing. Part 1. Ports with truncated housing for O-ring seal
BS ISO 11926-1 一般用途和流体动力的连接 端口和螺柱端部采用ISO 263 UN和UNF螺纹和O形密封圈 第一部分 O形密封圈用带截断外壳的端口
2009-05-07