JB/Z 286-1987 二氧化碳气体保护焊工艺规程

二氧化碳气体保护焊工艺规程
Welding procedure specification for CO2 shielded arc welding

1999-06-24

二氧化碳气体保护半自动焊工艺规范

1997-03-10

低压二氧化碳气体惰化保护装置
Low-pressure carbon dioxide inerting protection equipment

2018-09-17

二氧化碳矿化碱基固废制备建材工艺规程

2024-12-16

一氧化碳、二氧化碳红外气体分析器检定规程
Verification Regulation of Carbon Monooxide and Carbon Diaxide Infrared Gas Analyzer

2011-09-14

Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings
新建筑甲烷和二氧化碳地面气体保护措施设计实施规程

2019-01-24

水下局部排水二氧化碳保护半自动焊作业规程
The operation rules for underwater semi-automatic protection welding by way of water partially drained by CO2

1998-02-25

Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of carbon dioxide content of the inhaled gas
呼吸保护装置 - 试验和测试设备的方法 - 第9部分:吸入气体二氧化碳含量的测定

2015-10-08

焊接及相关工艺中烟尘和气体取样的实验室方法 第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定
Laboratory method for sampling fume and gases in welding and allied processes — Part 2: Determination of the emission rates of carbon monoxide, carbon dioxide, nitrogen monoxide and nitrogen dioxide during arc welding, cutting and gouging

2024-04-25

Система стандартов безопасности труда. Средства индивидуальной защиты органов дыхания автономные изолирующие. Метод определения содержания диоксида углерода и кислорода во вдыхаемой газовой дыхательной смеси
职业安全标准体系 呼吸保护装置 用于确定吸入气体呼吸混合物中二氧化碳和氧含量的方法

2015-02-27

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70
1/8至1-1/2英寸厚ER70碳钢（M-1/P-1/S-1 第1组和第2组）氩加25%二氧化碳保护气体保护金属弧焊（短路过渡模式）和氩加25%二氧化碳保护药芯焊丝电弧焊的标准焊接工艺规范（Swps）

2006-01-01

Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第2部分:电弧焊、切割和气刨过程中一氧化碳（CO）、二氧化碳（CO2）、一氧化氮（NO）和二氧化氮（NO2）排放率的测定

2009-10-05

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第2部分:电弧焊、切割和气刨过程中一氧化碳（CO）、二氧化碳（CO2）、一氧化氮（NO）和二氧化氮（NO2）排放率的测定（ISO 15011-2-2009）

2010-09-29

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

2006-01-01

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applications
碳钢（M-1/P-1/S-1）1和2组1/8至1-1/2英寸厚E7XT-X焊态或焊后热处理条件下的氩加25%二氧化碳保护药芯焊丝电弧焊标准焊接工艺规范（Swps） 主要用于管道应用

2006-01-01