GOST 6227-1980
Метчики для конической резьбы. Технические условия
锥螺纹丝锥 规格
GB/T 10878-2011
气瓶锥螺纹丝锥
Special taps of taper threads for gas cylinders
2011-12-30
KS B 3340
미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹
2019-12-13
KS B 3340
미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹
2024-12-20
HB 7545-1997
55°锥管螺纹用丝锥技术条件
FED GGG-T-80A
TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS (NO S/S DOCUMENT)
丝锥 螺纹切割 碳钢手工 切割螺纹 美国标准锥管螺纹（无S/S文件）
1970-11-24
DIN 802-6
Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥
2003-07-01
HB 7544-1997
55°锥管螺纹用丝锥 Rc1 1/2 Rc2 P=2.309
HB 7543-1997
55°锥管螺纹用丝锥 Rc 1/16￣Rc1 1/4 P=0.907￣2.309
DIN 2174
Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0.25 to M52 × 4 - Dimensions
ISO公制粗牙螺纹M2至M39和ISO公制细牙螺纹M3×0.25至M52×4用冷成型丝锥.尺寸
2008-11-01
DIN 40435
Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
符合DIN 8140标准的ISO公制螺纹用钢丝螺纹嵌件的螺纹孔（EG）机用丝锥-粗节螺纹（如M2至M52）和细节螺纹（如M8×1至M48×3）-尺寸
2003-07-01
DIN 371
Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0.2 to M10 × 1.25
粗节公制ISO螺纹M1至M10和细节公制ISO螺纹M1×0.2至M10×1.25用带加强柄的机用丝锥
2016-01-01
UNE 16605-1991
GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹的磨光丝锥 螺纹部分的制造公差
1991-01-10
ISO 2857-1973/Amd 2-1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件2
1986-09-25
ISO 2857-1973/Amd 1-1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件1
1984-07-01
ISO 2857-1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距用磨光丝锥——螺纹部分的制造公差
1973-12-01
DIN EN 22857
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
公差为4H至8H和4G至6G粗牙距和细牙距的ISO公制螺纹用磨光丝锥；螺纹部分的制造公差（ISO 2857-1973 包括AMD 1-1984和AMD 2-1986）；德文版EN 22857:1989
1990-07-01