NAS 929 Rev.3
Performance Requirement - Work Holder Airframe Spar Milling Machine
性能要求-工作支架机身梁铣床
2012-06-29
MIL MS35259A
BRACE, CORNER, BOX, 3 QUARTER-ROUND FLANGES, 6 MOUNTING HOLES (NO S/S DOCUMENT) (SUPERSEDING MS35259)
支架、拐角、箱体、3个四分之一圆法兰、6个安装孔（无S/S文件）（替代MS35259）
1967-11-02
MIL MS35260A
BRACE, CORNER, BOX, 1 QUARTER-ROUND AND 2 CUT FLANGES, 4 MOUNTING HOLES (NO S/S DOCUMENT)
支架、拐角、箱体、1个四分之一圆法兰和2个切割法兰、4个安装孔（无S/S文件）
1967-11-02
MIL MS35255A
BRACK, CORNER, BOX, LARGE, 1 QUARTER-ROUND AND 2 CUT FLANGES, 3 MOUNTING HOLES (NO S/S DOCUMENT)
支架、拐角、箱体、大型、1个四分之一圆法兰和2个切割法兰、3个安装孔（无S/S文件）
1967-11-02
T/CCS 013-2023
综采工作面超前支架智能化控制系统技术规范
SMPTE RP 124-1998
Insertion Pivot for Studio Lighting Units and Mating Holders for Use with Standing and Hanging Support Systems (R2005)
工作室照明装置和配套支架的插入枢轴 用于站立和悬挂支撑系统（R2005）
1998-01-01
T/QGCML 3088-2024
上覆采空区下特厚煤层综放工作面周期来压支架状态调整技术规程
2024-01-31
GB/T 18024.2-2010
煤矿机械技术文件用图形符号 第2部分：采煤工作面支架及支柱图形符号
Graphical symbols for the technical documentation of coal mine machinery - Part:2 Graphical symbols for coal face support and prop
2010-09-26
UNE-EN 733-1996
END-SUCTION CENTRIFUGAL PUMPS, RATING WITH 10 BAR WITH BEARING BRACKET. NOMINAL DUTY POINT, MAIN DIMENSIONS, DESIGNATION SYSTEM.
端吸离心泵 额定值为10巴 带轴承支架 标称工作点、主要尺寸、命名系统
1996-04-22
DIN 22434-2
Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 2: Coalfaces with shield support
硬煤开采中的地下照明.照明技术规划基础.第2部分:带掩护支架的采煤工作面
2003-02-01
NB/T 11118.4-2023
煤矿综采工作面机电设备EtherNet/IP通信接口和协议 第4部分：液压支架设备数据表
EtherNet/IP communication interface and protocol of mechanical and electrical equipment in fully mechanized coal mining face—Part 4:Powered support device profile
2023-02-06
DIN EN 733
PN 10 end-suction centrifugal pumps with bearing bracket - Nominal duty point, main dimensions and designation system
端吸离心泵 额定值为10巴 带轴承支架-标称工作点 主要尺寸 命名系统；德文版EN 733:1995
1995-08-01
DIN 15560-38
Projectors for film and television studios, stage and photographic use; holders devices, colour filters, coloured plastic films, frames for filters and plastic films
电影和电视工作室、舞台和摄影用投影仪；支架装置、彩色滤光片、彩色塑料薄膜、滤光片框架和塑料薄膜
1988-12-01
BS EN 4639-101-2007
Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder-Optical contact for cable EN 4641-100. Operating temperatures between -65°C and 125°C. Product standard
航空航天系列 带可拆卸对准套筒支架的1.25直径套圈的模块化多触点矩形光学连接器 电缆EN 4641-100的光学触点 工作温度在-65℃到125℃之间 产品标准
2008-02-29
BS EN 4639-102-2007
Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder-Optical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard
航空航天系列 带可拆卸对准套筒支架的1.25直径套圈的模块化多触点矩形光学连接器 电缆EN 4641-102的光学触点 工作温度在-55℃到100℃之间 产品标准
2008-02-29
DIN EN 3733-108
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard; German and English version EN 3733-108:2008
航空航天系列.连续工作温度高达150°C的自锁环连接的圆形单通道光学连接器.第108部分:电缆支架护套.产品标准；德语和英语版本EN 3733-108:2008
2009-09-01
EN 4639-102-2007
Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 °C and 100 °C - Product standard
航空航天系列 - 连接器 光学 矩形 模块化 多直径 直径为1,25的套圈 带可拆卸的对齐套筒支架 - 第102部分:电缆的光学接触EN 4641-102 - 工作温度在-55°C和100°C之间 - 产品标准
2007-12-12
EN 4639-101-2007
Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard
航空航天系列 - 连接器 光学 矩形 模块化 多直径 1,25直径的套圈 带可拆卸的对齐套筒支架 - 第101部分:电缆的光学接触EN 4641-100 - 工作温度在-65°C和125°C之间 - 产品标准
2007-12-12
BS 06/30145640 DC
EN 4639-102. Aerospace series. Connectors, optical, rectangular, modular, multicontact 1,25 dia. Ferrule, with removable alignment sleeve holder. Part 102. Optical contact for EN C2 10 A 102 cable operating temperature -55 degreesC to 100 degreesC. Product standard
EN 4639-102 航空航天系列 直径为1.25的多触点模块化矩形光学连接器 套圈 带可拆卸对准套筒支架 第102部 EN C2 10 A 102电缆的光学触点工作温度为-55摄氏度至100摄氏度 产品标准
2006-02-02
DIN EN 4639-101
Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1.25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between -65 °C and 125 °C - Product standard; German and English version EN 4639-101:2007
航空航天系列.带可拆卸对准套筒支架的直径为1.25的矩形模块化多触点光学连接器.第101部分:电缆用光学触点EN 4641-100.工作温度在-65°C和125°C之间.产品标准；德语和英语版本EN 4639-101:20
2009-06-01