MIL MS51840F
Plug, Machine Thread, O-Ring
螺塞 机螺纹 O形圈
2020-10-23
MIL MS51840C Notice 1-Validation
PLUG, MACHINE THREAD, O-RING (SUPERSEDING MS51840B)
机螺纹O形圈堵头（取代MS51840B）
1996-05-09
MIL MS51840C Notice 3-Validation
PLUG, MACHINE THREAD, O-RING (SUPERSEDING MS51840B)
机螺纹O形圈堵头（取代MS51840B）
2004-11-10
NAS 1602
Packing, Preformed, O-Ring, Straight Thread Tube Fitting Boss, Sizes
预成型O形圈直螺纹管件凸台填料尺寸
1994-11-30
MIL MS123120D Notice 1-Validation 1
Plug - Straight Thread, O-Ring Seal, 1/4 Inch, Aluminum
塞子-直螺纹O形密封圈1/4英寸铝
2015-04-10
MIL MS123120D
Plug - Straight Thread, O-Ring Seal, 1/4 Inch, Aluminum
螺塞-直螺纹 O形密封圈 1/4英寸 铝制
2010-07-07
MIL MS123120D Notice 2-Validation 2
Plug - Straight Thread, O-Ring Seal, 1/4 Inch, Aluminum
螺塞-直螺纹 O形密封圈 1/4英寸 铝制
2020-01-17
MIL MS51856E
NIPPLE, TUBE, LARGE HEX, O-RING, FLARELESS TYPE, HYDRAULIC
螺纹接头 管 大六角 O形圈 无扩口型 液压
2020-11-20
SAE MA2039B
PLUG, PORT - MJ THREAD, O-RING SEAL, AMS-5640, METRIC
螺塞 端口？MJ螺纹 O形密封圈 AMS-5640 公制
2022-05-16
BS EN 2607-2005
Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
航空航天系列 带锁环的螺纹适配器O形圈 调查
2006-01-24
SAE AMSP5510B
O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F)
O形圈 预制 直螺纹管接头凸台 I型液压（-65至160°F）
2023-04-12
EN 2607-2005
Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
航空航天系列 - 用于适配器的O形圈 螺纹 带锁定 - 调查
2005-12-07
MIL MS9015B
PLUG, MACHINE THREADED - "O" RING SEAL (SUPERSEDING MS9015A) (SEE BASE FOR INACTIVATION NOTICE)
机械螺纹“O”形密封圈（取代MS9015A）插头（参见底座上的停用通知）
1974-07-26
DIN 3865
Compression fittings and couplings - 24° cone compression ends with O-ring for ports as in DIN EN ISO 8434-1
根据DIN EN ISO 8434-1 用于压缩接头的带O形圈的24°螺纹接头
2002-04-01
NAS 1595
Packing, Preformed - Straight Thread Tube Fitting Boss. Mil-R-25897 Rubber, 75 Shore, O-Ring
预成型填料-直螺纹管件凸台 Mil-R-25897橡胶 75肖氏 O形圈
1973-08-15
MIL MS51519D
Nipple, Tube, Large Hex for Use with O-Ring, 37 Degree Flared
螺纹接头 管 与O形圈一起使用的大六角 37度扩口
2020-10-23
NAS 1596
Packing, Preformed - Straight Thread Tube Fitting Boss, Mil-R-25897 Rubber, 90 Shore, O-Ring
预成型填料-直螺纹管接头凸台 Mil-R-25897橡胶 90肖氏 O形圈
1973-08-15
NFPA(Fluid) T3.6.54 R1-1997(R2019)
Hydraulic fluid power - Cylinder ports - SAE straight thread O-ring and four-bolt flange ports - ISO straight thread O-ring and four-bolt and four-bolt flange ports - Heavy duty and light duty square head tie rod cylinders (Revision and redesignation of ANSI B93.75M-1987)
液压传动.气缸端口.SAE直螺纹O形圈和四螺栓法兰端口.ISO直螺纹O形圈和四螺栓和四螺栓法兰端口.重型和轻型方头拉杆气缸（ANSI B93.75M-1987的修订和重新命名）
1997-07-22