GB/T 28909-2012
超高强度结构用热处理钢板
Extra-high strength structural steel plates in the heat-treatment condition
2012-11-05
YB/T 4363-2014
超高强度热处理锚杆钢筋
Super high strength heat treated steel bars for rock bolts
2014-05-06
ASM SA-352
USS DUAL PHASE 80 - Specially Heat Treated High-Strength Steel
USS双相80-特殊热处理高强度钢
1978-12-01
ASTM B957/B957M-23
Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
架空导线用超高强度和超高强度镀锌（镀锌）钢芯线的标准规范
2023-10-01
ASTM B958/B958M-23
Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
架空导线用超高强度和超高强度A级锌-5%铝混合稀土合金涂层钢芯线的标准规范
2023-10-01
NAS 1511
Heat Treatment and Processing Requirements for 5% Cr Ultra High Strength Alloy Steel (H-11) Fasteners
5%Cr超高强度合金钢（H-11）紧固件的热处理和加工要求
1980-11-01
MIL MIL-PRF-32667
ULTRA HIGH STRENGTH STEEL POWDER FOR ADDITIVE MANUFACTURING FABRICATION OF PARTS
用于零件添加剂制造的超高强度钢粉末
2020-10-28
SAE J3215_202303
Hydrogen Embrittlement Testing of Ultra High Strength Steels and Stampings by Acid Immersion
超高强度钢和冲压件的酸浸氢脆试验
2023-03-08
MIL MIL-P-13326D Amendment 1
PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES (SUPERSEDING MIL-P-13326C)
板材、金属、钢合金；热处理 高强度；用于焊接结构（取代MIL-P-13326C）
2002-11-26
SAE AMS2448C
Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process
碳化钨涂层在超高强度钢上的应用高速氧/燃料工艺
2020-12-10
ASTM A1039/A1039M-20
Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
用双辊铸造工艺生产的高强度低合金和超高强度的工业用结构热轧碳素钢薄板的标准规范
2020-07-01
ASTM F3148-17a(2024)
Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
英制尺寸最小抗拉强度144ksi的热处理钢和合金钢高强度结构螺栓组件标准规范
2024-06-01
WRC 349
Part 1: Postweld Heat Treatment Cracking In Chromium-Molybdenum Steels; Part 2: Postweld Heat Treatment Cracking In High Strength Low Alloy Steels
第1部分:铬钼钢的焊后热处理裂纹；第2部分:高强度低合金钢的焊后热处理裂纹
ASTM F3125/F3125M-25
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi, 144 ksi, and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
最小抗拉强度120 ksi、144 ksi和150 ksi英制尺寸和最小抗拉强度830 MPa和1040 MPa公制尺寸的热处理高强度结构螺栓和组件的标准规范
2025-02-01