GB/T 7991.4-2019
搪玻璃层试验方法 第4部分：耐机械冲击性能的测定
2019-12-10
HG/T 2637~2638-2017
搪玻璃件几何尺寸检测方法和搪玻璃设备质量分等(2017)
2017-11-07
HG/T 2637-2017
搪玻璃件几何尺寸检测方法
Detecting methods of geometry dimension for glass-lined parts
2017-11-07
DIN 28145-6
Parts welded to glass lined agitator vessels; bracket
焊接到搪玻璃搅拌容器上的零件；支架
1979-09-01
DIN 28145-4
Parts welded to glass lined agitator vessels; support rings
焊接到搪玻璃搅拌容器上的零件；支撑环
1993-12-01
DIN 28145-8
Parts welded to glass lined agitator vessels; tubular and profile support
焊接到搪玻璃搅拌容器上的零件；管状和异型支架
1993-04-01
DIN 28144
Agitator assembly for two piece glass lined steel agitators - Dimensions
两件式搪玻璃钢搅拌器用搅拌器组件.尺寸
2006-12-01
DIN 28145-3
Weld-on lugs for glass-lined steel mixing vessels - Arrangement and sizes
焊接到搪玻璃搅拌容器上的零件；吊耳的位置和尺寸
1993-09-01
DIN 28159 Supplement 1
Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength
外连接搪玻璃钢搅拌器的轴端.尺寸.补充件1:有关强度的信息
2006-12-01
DIN 28145-5
Parts welded to glass lined steel agitator vessels - Part 5: Insulation collar at the bottom discharge opening
焊接到搪玻璃钢搅拌容器上的零件.第5部分:底部排放口的绝缘环
1995-11-01
DIN 28138-2
Rotating mechanical seals for agitator shafts - Part 2: Steel, glass-lined - Operating data, assembly dimensions
搅拌轴用旋转机械密封件.第2部分:搪玻璃钢.操作数据和装配尺寸
2006-06-01
DIN 28145-1
Parts welded to glass lined steel agitator vessels - Part 1: Support for baffle Form S for vessels nominal diameter 2400 to 3600 mm; connecting dimensions; interaktive for new design
焊接到搪玻璃钢搅拌容器上的零件.第1部分:公称直径2400至3600 mm的容器用挡板模板S支架；连接尺寸；新设计的互动
1999-11-01