HB 2870-1976
硬质合金切割衬套
1978-05-01
ASD-STAN prEN 2288
Bushes, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
带自润滑衬套的耐腐蚀钢法兰衬套.尺寸和载荷
2002-03-29
ASD-STAN prEN 2287
Bushes, plain, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
带自润滑衬套的普通耐腐蚀钢衬套.尺寸和载荷
2002-03-29
SAE AMS5025A
Steel-Free Cutting Manganese (Heat Treated)
无钢切割锰（热处理）
1946-06-01
GOST 10047-1962
Резцы из быстрорежущей стали. Технические условия
高速钢切割工具 刺激
NAS 77 Rev.15
Bushing-Flanged, Press Fit Steel, Cres, Bronze & Copper
法兰衬套 压配合钢 Cres 青铜和铜
2016-03-31
GOST 28281-1989
Фрезы дисковые для нарезания зубьев звездочек к приводным роликовым и втулочным цепям. Технические условия
用于链轮的盘式切割器 用于传输辊和衬套链 规格
UNE-EN 2287-1992
AEROSPACE SERIES. BUSHES, PLAIN CORROSION RESISTING STEEL WITH SELF-LUBRICANTING LINER. DIMENSIONS AND LOADS.
航空航天系列 衬套 普通耐腐蚀钢 带自润滑衬套 尺寸和负载
1992-10-15
UNE-EN 2288-1992
AEROSPACE SERIES. BUSHES, FLANGED CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS.
航空航天系列 衬套 带自润滑衬套的法兰耐腐蚀钢 尺寸和负载
1992-10-15
BS EN 2288-2019
Aerospace series. Bush, flanged, corrosion resisting steel, with self-lubricating liner. Dimensions and loads
航空航天系列 带自润滑衬套的耐腐蚀钢法兰衬套 尺寸和荷载
2019-02-25
EN 2288-2019
Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
航空航天系列.带自润滑衬套的耐腐蚀钢法兰衬套.尺寸和负载
2019-02-20
SME MR00-129
Dies For Cutting Materials Other Than Steel
用于切割除钢以外材料的模具
2000-11-01
QB/T 2004-1994
食品工业用带垫圈不锈钢卡箍衬套
1994-08-23
NZS 3441-1978
Specification for hot-dipped zinc-coated steel coil and cut lengths
热浸镀锌钢卷和切割长度规范
MIL MIL-E-17764C Notice 1-Cancellation
ELETRODE, CUTTING, TUBULAR, STEEL, COVERED (NO S/S DOCUMENT)
电镀 切割 管状 钢 覆盖（无S/S文件）
1988-02-25
BS EN 4537-2-2009
Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load-Dimensions and loads. Inch series
航空航天系列 衬套 用耐腐蚀钢法兰连接 带自润滑衬套 高负荷 尺寸和负载 英寸系列
2009-07-31
UNE 22652-1985
ROCK DRILLING. FORGED COLLARED SHANKS AND CHUCK BUSHINGS FOR HOLLOW HEXAGONAL DRILL-STEELS.
凿岩 空心六角钻头钢用锻造带领柄和卡盘衬套
1985-03-15
DIN 7527-4
Steel Forgings; Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes
钢锻件；无缝开式模锻衬套的加工余量和允许偏差
1972-01-01
EN 13084-6-2015
Free-standing chimneys - Part 6: Steel liners - Design and execution
独立式烟囱 - 第6部分:钢衬套 - 设计和执行
2015-11-25
KS P ISO 7787-1
치과 — 기공용 커터 — 제1부: 기공용 스틸 커터
牙科 - 实验室切割机 - 第1部分:钢实验室切割机
2019-11-25