GOST 21058-1975
Жидкости для авиационных гидросистем и масла авиационные. Метод определения пенообразующих свойств
液压油和润滑油 泡沫特性测定方法
MIL MIL-V-24630 Amendment 3
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
液压油和润滑油液的止回阀
1990-06-29
MIL MIL-V-24630/2A Notice 3-Validation 2
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
液压油和润滑油液的止回阀
2019-04-17
SAE MS1004_201710
Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification
润滑油 工业油及相关产品H型（液压油） - 规格
2017-10-18
UNE 51110-1981
TESTING OF LUBRICANMTS AND HYDRAULIC FLUIDS. DETERMINATION OF AIR RELEASE PROPERTIES
润滑油和液压油的测试 空气释放特性的测定
1981-12-15
MIL MIL-DTL-24630A
Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for
液压油和润滑油用直列单向阀通用规范
2014-06-17
MIL MIL-V-24630
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID
液压油和润滑油液用直列单向阀
1984-03-19
MIL MIL-STD-1518E
Storage, Handling, and Servicing of Aviation Fuels, Lubricating Oils, And Hydraulic Fluids at Contractor Facilities
承包商设施内航空燃料、润滑油和液压油的储存、搬运和维修
2014-01-17
MIL MIL-DTL-24630/1B
Valves, Check, In-Line, Non-Reversible Installation for Hydraulic Fluid and Lubricating Oil Fluid
液压油和润滑油液用单向、直列、不可逆安装阀门
2014-06-17
MIL MIL-C-15730M
COOLERS, FLUID, NAVAL SHIPBOARD: LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER (SUPERSEDING MIL-C-15730L)
船用液体冷却器:润滑油、液压油和淡水（取代MIL-C-15730L）
1995-05-24
MIL MIL-C-15730M Amendment 1
COOLERS, FLUID, NAVAL SHIPBOARD: LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER (SUPERSEDING MIL-C-15730L)
船用流体冷却器:润滑油、液压油和淡水（取代MIL-C-15730L）
1997-03-28
QPL QPL-24630-6
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID (SUPERSEDING QPL-24630-5)
液压油和润滑油液用直列式止回阀（取代QPL-24630-5）
2004-10-29
MIL MIL-V-24630/2A
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID (SUPERSEDING MIL-V-24630/2)
液压油和润滑油液用直列式止回阀（取代MIL-V-24630/2）
1987-06-18
ISO 28523-2009
Ships and marine technology — Lubricating and hydraulic oil systems — Guidance for sampling to determine cleanliness and particle contamination
船舶与海洋技术——润滑油和液压油系统——确定清洁度和颗粒污染的取样指南
2009-02-09
MIL MIL-V-24630/1A
VALVES, CHECK, IN-LINE, NON-REVERSIBLE INSTALLATION FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID (SUPERSEDING MIL-V-24630/1)
液压油和润滑油液用直列式不可逆止回阀（取代MIL-V-24630/1）
1986-08-08
GB/T 30507-2014
船舶和海上技术 润滑油系统和液压油系统 颗粒污染物取样和清洁度判定导则
Ships and marine technology―Lubricating and hydraulic oil systems―Guidance for sampling to determine cleanliness and particle contamination
2014-02-19
MIL MIL-V-24630/1A Amendment 1
VALVES, CHECK, IN-LINE, NON-REVERSIBLE INSTALLATION FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID (SUPERSEDING MIL-V-24630/1)
液压油和润滑油流体的阀 检查 在线 不可逆安装（取代MIL-V-24630/1）
1988-09-15
BS 08/30168618 DC
BS ISO 28523. Ships and marine technology. Sampling from lubricating oil andhydraulic oil systems. Guidance for sampling for determination of cleanliness and solid particle contamination
BS ISO 28523 船舶和海洋技术 从润滑油和液压油系统取样 清洁度和固体颗粒污染测定用取样指南
2008-01-07
MIL MIL-STD-1518B Notice 2-Reactivation
STORAGE, HANDLING, AND SERVICING OF AVIATION FUELS, LUBRICATIN G OILS AND HYDRAULIC FLUIDS AT CONTRACTOR FACILITIES (SUPERSEDING MIL-STD-1518A) (S/S BY MIL-STD-1518C)
在承包商设施储存、处理和维修航空燃料、润滑油和液压油（取代MIL-STD-1518A）（S/S改为MIL-STD-1518C）
1999-03-22
ASTM D6595-22
Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
旋转圆盘电极原子发射光谱法测定用过的润滑油或液压油中磨损金属和污染物的标准试验方法
2022-10-01