NASM 35812 Rev.2
Clevis, Rod End, Adjustable and Plain, Steel
钢制可调平杆端U形夹
2016-07-29
ISO 8738-1986
Plain washers for clevis pins — Product grade A
U形夹销平垫圈——产品等级A
1986-11-06
JB/T 12790-2016
伞花形平圆头抽芯铆钉
Tri-fold round end blind rivets with break pull mandrel and protruding head
2016-04-05
BS EN 28738-1992
Plain washers for clevis pins. Product grade A
U形夹销用平垫圈 产品等级为A级
1992-10-15
EN 28738-1992
Plain washers for clevis pins - Product grade A (ISO 8738:1986)
U形销的平垫圈 - 产品等级A（ISO 8738:1986）
1992-07-24
HB 7027.14-1994
夹具通用元件导向件 三角形平钻模板
1994-10-31
GB/T 24272-2009
热双金属平螺旋形元件机械转矩率试验方法
Test method for mechanical torque rate of spiral coils of thermostat metal
2009-06-19
JB/T 7130-2008
热双金属平螺旋形元件机械转矩率试验方法
Test method mechanical torque rate of spiral coils of thermostat metal
2008-02-01
MIL MS29562B
FITTING, ATTACHMENT, MOLDED, TANK, THRU HOLE, FLUSH, (O) RING, RECTANGULAR, 10 X 16 (SUPERSEDING MS29562A)
10 X 16（取代MS29562A）矩形平齐（O）形环通孔水箱模制配件、附件
1974-08-30
DIN EN 28738
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
U形夹销用平垫圈；产品等级（ISO 8738-1986）；德文版EN 28738:1992
1992-10-01
NAS 1151 THRU 1158 Rev.15
Screw, Tension, Machine-Flat 100 Degree Flush Head, Close Tolerance, Short Thread, Offset Cruciform and Offset Cruciform-Ribbed, 160 KSI Ftu
100°平头紧公差短螺纹偏置十字形和偏置十字形带肋机平螺钉 拉力 160 KSI Ftu
2012-10-31
MIL MS29563B Notice 2-Cancellation
FITTING, ATTACHMENT, MOLDED, TANK, FLUSH "O" RING, RECTANGULAR, 10 X 16 (NO S/S DOCUMENT) (SUPERSEDING MS29563A)
10 X 16（无S/S文件）矩形齐平O形环水箱模制配件（代替MS29563A）
1995-12-15
MIL MS29568B
FITTING, ATTACHMENT, MOLDED TANK, FLUSH, (O) RING, OVAL (NO S/S DOCUMENT) (SUPERSEDING MS29568A)
配件、附件、模制水箱、平齐、（O）形环、椭圆形（无S/S文件）（替代MS29568A）
1974-08-30
NAS 1581 Rev.13
BOLT, SHEAR, 100 DEGREES FLUSH REDUCED HEAD, OFFSET CRUCIFORM, OFFSET CRUCIFORM - RIBBED AND DOVETAIL SLOT, 95 KSI FSU
螺栓 剪切 100度齐平缩径头 偏置十字形 偏置十字形-带肋和燕尾槽 95 KSI FSU
2015-11-20
MIL MS29565B
FITTING, ATTACHMENT, MOLDED TANK, FLUSH, (O)RING, RECTANGULAR, 12 X 18 (NO S/S DOCUMENT) (SUPERSEDING MS29565A)
12 X 18（无S/S文件）矩形平齐（O）形环模制水箱配件附件（替代MS29565A）
1974-08-30
MIL MS35812E
CLEVIS, ROD END&ADJUSTABLE AND PLAIN, STEEL (SUPERSEDING MS35812D) (S/S BY NASM35812-1998)
钢制可调平杆端U形夹（替代MS35812D）（根据NASM358112-1998标准S/S）
1964-02-27
MIL MS29563B
FITTING, ATTACHMENT, MOLDED, TANK, FLUSH "O" RING, RECTANGULAR, 10 X 16 (NO S/S DOCUMENT) (SUPERSEDING MS29563A)
10 X 16矩形平齐“O”形密封圈（无S/S文件）模制水箱配件（替代MS29563A）
1974-08-30
MIL MIL-DTL-85069/3B
SLEEVES, FASTENER, GROOVED, 100º FLUSH REDUCED HEAD, SHEAR, 1/64 OVERSIZE(SUPERSEDING MIL-S-85069/3A)
套筒 紧固件 槽形 100º平齐缩径头 剪切 1/64超大（取代MIL-S-85069/3A）
2006-01-25
MIL MIL-DTL-85069/5B
SLEEVES, FASTENER, GROOVED, 100º FLUSH FULL HEAD, TENSION, 1/64 OVERSIZE(SUPERSEDING MIL-S-85069/5A)
套筒 紧固件 槽形 100º齐平全封头 张力 1/64超大（取代MIL-S-85069/5A）
2006-01-25
MIL MIL-DTL-85069/9B
SLEEVES, FASTENER, GROOVED, 100º FLUSH FULL HEAD, TENSION, 1/32 OVERSIZE(SUPERSEDING MIL-S-85069/9A)
套筒 紧固件 槽形 100º齐平全封头 张力 1/32超大（取代MIL-S-85069/9A）
2006-01-25