BS EN 10028-7-2016
Flat products made of steels for pressure purposes-Stainless steels
压力用扁钢制品
2018-06-22
FZ/T 95005-2019
不锈钢导辊式平洗槽
Stainless steel guide roller flat washing tank
2019-12-24
BS ISO 16143-1-2014
Stainless steels for general purposes-Corrosion-resistant flat products
通用不锈钢
2014-11-30
UNE-EN 10028-7-2009
Flat products made of steels for pressure purposes - Part 7: Stainless steels
压力用扁钢制品.第7部分:不锈钢
2009-05-06
DIN EN 10028-7
Flat products made of steels for pressure purposes - Part 7: Stainless steels
压力用扁钢制品.第7部分:不锈钢
2016-10-01
DIN 5512-3
Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard
轨道车辆用材料.钢.第3部分:不锈钢平板产品；选定标准
2004-05-01
ISO 9328-7-2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
用于压力目的的钢制产品 - 技术交付条件 - 第7部分:不锈钢
2018-02-01
ISO 16143-1-2014
Stainless steels for general purposes — Part 1: Corrosion-resistant flat products
不锈钢用于一般用途 - 第1部分:耐腐蚀平板产品
2014-05-20
MIL DSCC 05019
CAPACITORS, ULTRA LONG LIFE STAINLESS-STEEL CASE FLAT PACK, 125'C
电容器 超长寿命不锈钢外壳扁平封装 125摄氏度
2006-11-22
ASTM F879-23
Standard Specification for Stainless Steel Socket Button, Low and Flat Countersunk Head Cap Screws
不锈钢内六角、低和平沉头螺钉标准规范
2023-06-01
ASTM A666/A666M-24
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
退火或冷加工奥氏体不锈钢薄板、带材、板材和扁钢的标准规范
2024-03-01
ASTM A480/A480M-25a
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
标准规范平板不锈钢和耐热钢板 薄板和带材的一般要求
2025-06-01
BS 09/30196511 DC
BS ISO 9328-7. Steel flat products for pressure purposes. Technical delivery conditions. Part 7. Stainless steels
BS ISO 9328-7 压力用扁钢制品 技术交付条件 第七部分 不锈钢
2009-08-11
BS ISO 18070-2015
Corrosion of metals and alloys. Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
金属和合金的腐蚀 带碟形弹簧的缝隙腐蚀成型机 用于扁平试样或不锈钢管
2015-11-30
GB/T 40314-2021
金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型
Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
2021-08-20
ISO 18070-2015
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
金属和合金的腐蚀 - 用不锈钢制成的扁平样品或管子的圆盘弹簧的缝隙腐蚀原子
2015-11-05
ISO 3506-7-2024
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 7: Flat washers with specified grades and property classes
紧固件耐腐蚀不锈钢紧固件的机械性能第7部分:指定等级和性能等级的平垫圈
2024-07-25
KS B ISO 7046-2(2018 Confirm)
+자 홈붙이 납작 접시머리 스크루(일반 머리 형) - 제품등급A - 제2부 : 강도구분 8.8의 강, 스테인리스강 및 비철금속
十字槽沉头螺钉（普通头型）A级第2部分:性能等级8.8钢、不锈钢和有色金属
2008-04-07
KS B ISO 7046-2(2023 Confirm)
+자 홈붙이 납작 접시머리 스크루(일반 머리 형) - 제품등급A - 제2부 : 강도구분 8.8의 강, 스테인리스강 및 비철금속
十字槽沉头螺钉（普通头）－A级－第2部分:性能等级8.8的钢、不锈钢和有色金属
2008-04-07
GB/T 819.2-2016
十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉
Countersunk flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws
2016-02-24