ASTM C1352/C1352M-21
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
石材弯曲弹性模量的标准试验方法
2021-09-01
GB/T 10700-2006
精细陶瓷弹性模量试验方法 弯曲法
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
2006-02-22
GOST 18336-2017
Пластмассы ячеистые жесткие. Метод определения модуля упругости при сжатии
硬质泡沫塑料 压缩弹性模量试验方法
2017-11-30
GOST 9550-1981
Пластмассы. Методы определения модуля упругости при растяжении, сжатии и изгибе
塑料 测定强度 压缩和弯曲时的弹性模量的方法
JC/T 2373-2016
玻璃管材弹性模量和弯曲强度试验方法 缺口环法
Test method for determining elastic modulus and bending strength of glass tubes-Split ring method
2016-07-11
AS/NZS 2891.13.1-2013
Methods of sampling and testing asphalt, Method 13.1: Determination of the resilient modulus of asphalt - Indirect tensile method
沥青取样和试验方法 方法13.1:沥青弹性模量的测定-间接拉伸法
2013-07-18
ASTM D7369-20
Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
用间接拉伸试验测定沥青混合料弹性模量的标准试验方法
2020-11-01
AS 1774.31.1-2000
Refractories and refractory materials - Physical test methods, Method 31.1: Modulus of elasticity - Flexural method
耐火材料和耐火材料.物理试验方法 方法31.1:弹性模量.弯曲法
2000-11-01
JC/T 678-1997
玻璃材料弹性模量、剪切模量和泊松比试验方法
Test method for Young's modulus, sheat modulus and Poisson's ratio of glass material
1997-08-22
GB/T 37780-2019
玻璃材料弹性模量、剪切模量和泊松比试验方法
Test method for elastic modulus，shear modulus and Poisson's ratio of glass
2019-08-30
GB/T 22315-2008
金属材料 弹性模量和泊松比试验方法
Metallic materials - Determination of modulus of elasticity and poisson's ratio
2008-08-05
ASTM C469/C469M-22
Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
压缩混凝土静态弹性模量和泊松比的标准试验方法
2022-04-01
GOST R 57864-2017
Композиты полимерные. Метод определения предела прочности и модуля упругости при растяжении в направлении толщины образца
聚合物复合材料 测定全厚度平直拉伸强度和弹性模量的试验方法
BS ISO 19603-2016
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
精细陶瓷（高级陶瓷、高级工业陶瓷） 测定厚陶瓷涂层弹性模量和弯曲强度的试验方法
2016-11-30
JC/T 2172-2013
精细陶瓷弹性模量、剪切模量和泊松比试验方法—脉冲激励法
Aluminium titanate ceramic pipe for aluminium-melt feeding
2013-04-25
ISO 19603-2016
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings
精细陶瓷（先进陶瓷 先进技术陶瓷） 确定厚陶瓷涂层的弹性模量和弯曲强度的试验方法
2016-10-31
AS 1012.17-1997
Methods of testing concrete, Method 17: Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens
混凝土试验方法 方法17:测定混凝土试样的静态弦弹性模量和泊松比
1997-08-05
KS F 2438
콘크리트 원주 공시체의 정탄성 계수 및 포아송비 시험 방법
圆柱形混凝土试件压缩静态弹性模量和泊松比的试验方法
2017-08-07
KS F 2438(2022 Confirm)
콘크리트 원주 공시체의 정탄성 계수 및 포아송비 시험 방법
圆柱形混凝土试件压缩静态弹性模量和泊松比的试验方法
2017-08-07
ASTM E2769-22
Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
用三点弯曲和控制加载速率的热机械分析法测定弹性模量的标准试验方法
2022-02-01