GB/T 12555-2006
塑料注射模模架
Injection mould bases for plastics
2006-12-08
GB/T 12556-2006
塑料注射模模架技术条件
Specification of injection mould bases for plastics
2006-12-08
JB/T 12649-2016
塑料注射模热流道系统 技术条件
Hot-runner systems of injection moulds for plastics - Specifications
2016-01-15
JB/T 10894-2008
注塑机计算机控制系统 通用技术条件
Computer control systems for plastics injection moulding machines--General requirements
2008-06-04
UNE-EN 12107-1998
PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS.
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定
1998-05-07
BS EN 12107-1998
Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定
1998-03-15
BS EN ISO 580-2005
Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
塑料管道系统 注塑热塑性塑料配件 目视评估加热效果的方法
2005-11-05
ISO 580-2005
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
塑料管道系统——注塑热塑性塑料配件——目视评估加热效果的方法
2005-03-07
GOST R ISO 580-2008
Трубопроводы из пластмасс. Детали соединительные литьевые из термопластов. Методы определения изменения внешнего вида после прогрева
塑料管道系统 注塑热塑性塑料配件 加热后配件外观变化的确定方法
UNE-EN 802-1995
PLASTICS PIPING AND DUCTING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR PRESSURE PIPING SYSTEMS. TEST METHOD FOR MAXIMUN DEFORMATION BY CRUSHING.
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 通过压碎实现最大变形的试验方法
1995-09-18
BS EN 802-1995
Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 用压碎法测定最大变形的试验方法
1995-07-15
DIN 78004-1
Plastics - Thermoplastic styrene-based elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
塑料.模塑和挤压用热塑性苯乙烯基弹性体.第1部分:命名系统和规范基础
2021-03-01
UNE-EN ISO 580-2005
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
塑料管道和导管系统.注射成型热塑性塑料配件.加热效果的目视评估方法（ISO 580-2005）
2005-11-30
DIN EN ISO 580
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
塑料管道和导管系统.注射成型热塑性塑料配件.加热效果的目视评估方法（ISO 580-2005）；德文版EN ISO 580:2005
2005-05-01
UNE-EN ISO 1872-1-2001
Plastics. Polyethylene (PE) moulding and extrusion materials. Part 1: Designation system and bases for specification. (ISO 1872-1:1993)
塑料 聚乙烯（PE）模塑和挤出材料 第1部分:规范的命名系统和基础 （ISO 1872-1-1993）
2001-02-23
UNE-EN 804-1995
PLASTICS PIPING SYSTEMS. INJECTION-MOULDED SOCKET FITTINGS FOR SOLVENT-CEMENTED JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL HYDROSTATIC PRESSURE.
塑料管道系统 压力管道溶剂胶结接头用注射成型承插接头 耐短期内部静水压力的试验方法
1995-09-18
BS EN 804-1995
Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
塑料管道系统 压力管道溶剂胶结接头用注射成型承插接头 耐短期内部静水压力的试验方法
1995-07-15
UNE-EN 803-1995
PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR ELASTIC SEALING RING TYPE JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL PRESSURE WITHOUT END THRUST.
塑料管道系统 压力管道弹性密封环式接头用注射成型热塑性塑料配件 无端推力的短期内压耐受性试验方法
1995-09-18
BS EN 803-1995
Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
塑料管道系统 压力管道弹性密封环式接头用注射成型热塑性塑料配件 无端推力的短期内压耐受性试验方法
1995-07-15