CB/T 4327-2013
船用对焊钢法兰
The marine butt-welding steel flanges
2013-07-22
CB/T 50-2008
船用对焊钢环松套钢法兰
Marine welding neck steel outer composite flanges
2008-03-17
CB/T 3212-1999
船用搭焊、对焊、铜管折边松套、异径钢法兰
Lap Welding. Balanced welding. Copper pipe flanging free Flared steel flange for marine
1999-04-30
CB/T 46-2007
船用搭焊钢法兰
Marine slip-on steel flange
2007-03-23
CB/T 49-2007
船用搭焊钢环松套钢法兰
Marine combination pipe flanges of slip-on steel outer flanges of fillet weld-on steel inner flanges
2007-03-23
CBM 1017-1981
30kgf/cm2对焊钢法兰
CBM 1018-1981
40kgf/cm2对焊钢法兰
CBM 1019-1981
63kgf/cm2对焊钢法兰
GB/T 15530.6-2008
铜管折边和铜合金对焊环松套钢法兰
Loose plate flange in steel with a copper pipe or a weld-neck collar in copper alloy for welding
2008-08-25
BS 1868-1975+A1-1990
Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
石油、石化和相关工业用钢制止回阀（法兰和对焊端）规范
2010-01-31
BS 1560-3-1-1989
Circular Flanges for Pipes, Valves and Fittings (Class Designated) - Part 3: Steel, Cast Iron and Copper Alloy Flanges - Section 1: Specification for Steel Flanges
管道、阀门和配件用圆形法兰（指定类别）.第3部分:钢、铸铁和铜合金法兰.第1节:钢法兰规范
1989-01-01
ISO 7005-1-2011
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
管法兰第1部分:工业和一般服务管道系统用钢法兰
2011-07-15
DIN 16962-3
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
1型和2型聚丙烯（PP）压力管道的管接头和元件；对焊用管道弯头.尺寸
1980-08-01
UNE-EN 1759-1-2005
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, Class designated- Part 1: Steel flanges, NPS 1/2 to 24.
法兰及其接头 管道、阀门、配件和附件用指定等级的圆形法兰.第1部分:NPS 1/2至24的钢法兰
2005-06-29
ASTM A961/A961M-25
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
管道用钢法兰、锻造配件、阀门和零件的通用要求标准规范
2025-05-01
BS 1873-1975
Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
石油、石化和相关工业用钢制截止阀、截止阀和止回阀（法兰和对焊端）规范
1975-04-30
DIN 16963-6
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
高密度聚乙烯（PE-HD）压力管道的管接头组件和配件；对焊用注塑配件；尺寸
1989-10-01
DIN EN 1759-1
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
法兰及其接头.管道、阀门、配件和附件用指定等级的圆形法兰.第1部分:NPS 1/2至24的钢法兰；德文版EN 1759-1:2004
2005-02-01
DIN 16962-1
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
1型和2型聚丙烯（PP）压力管道的管接头和元件；对焊用分段结构弯管.尺寸
1980-08-01
DIN 16962-11
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
1型和2型聚丙烯（PP）压力管道的管接头和元件；对焊用旋压异径套筒.尺寸
1980-08-01