SAE AS161A
Lifting Eye - Propeller Shaft
起重眼 - 螺旋桨轴
2012-12-05
GB/T 63-1988
环形螺母
Lifting nuts
1988-06-24
DIN 48324
Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut
1 kV以下的电信和电力架空线路；拉杆、墙板、吊耳螺母
1959-03-01
DIN 15413
Bottom blocks for lifting appliances; lifting hook nuts
起重机械的底块；吊钩螺母
1983-08-01
DIN 7541
Lifting appliances; large-eye hooks; grade 5
起重机械；大眼钩；五年级
1984-03-01
GB/T 10051.10-2010
起重吊钩 第10部分：吊钩螺母
Lifting hooks - Part 10: Hook nuts
2011-01-10
MIL MS21303B Notice 2-Validation 1
NUT, EYE, THIMBLE HOT DIP GALVANIZED (POLE LINE)
套管热浸镀锌眼螺母（极线）
2018-09-19
GB/T 10051.11-2010
起重吊钩 第11部分：吊钩螺母防松板
Lifting hooks - Part11: Securing plates for hook nuts
2011-01-10
GB/T 24812-2009
4级链条用锻造环眼吊钩
Forged steel lifting hooks with point and eye for use with steel chains of grade 4
2009-12-15
MIL MS21303B Amendment 1
NUT, EYE, THIMBLE HOT DIP GALVANIZED (POLE LINE) (SUPERSEDING MS21303A)
套管热浸镀锌眼螺母（极线）（代替MS21303A）
1996-02-20
MIL MS21303B
NUT, EYE, THIMBLE HOT DIP GALVANIZED (POLE LINE) (SUPERSEDING MS21303A)
热浸镀锌套管环螺母（杆线）（替代MS21303A）
1968-04-26
BS 11/30238579 DC
BS ISO 7597. Forged steel lifting hooks with point and eye for use with grade 8 chain
BS ISO 7597 与8级链条一起使用的带尖和眼的锻钢吊钩
2011-02-10
BS ISO 4779-2021
Chain components for lifting purposes. Forged eye hook with point and latch. Grade 4, stainless steel, solution annealed
用于提升的链条组件 带尖头和门闩的锻造眼钩 4级 不锈钢 固溶退火
2021-08-20
ISO 4779-2021
Chain components for lifting purposes — Forged eye hook with point and latch — Grade 4, stainless steel, solution annealed
起重用链条部件.带尖端和插销的锻造吊环.固溶退火的4级不锈钢
2021-08-19
IEEE C135.2-1999
IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
架空线路施工用螺纹镀锌铁绞线眼锚杆和螺母IEEE标准
1999-12-30
IEEE/ANSI C135.2-1987
American National Standard For Threaded Zinc-coated Ferrous Strand-eye Anchor Rods And Nuts For Overhead Line Construction
架空线路施工用螺纹镀锌铁绞线眼锚杆和螺母的美国国家标准
1988-01-01