ADS AGS3048
Fitting Data for Avlock Blind Nuts
Avlock盲板螺母的装配数据
1959-11-02
HG/T 20570.15-1995
管路限流孔板的设置
1996-05-02
ADS RS699
Installation Information for Rivet Blind AGS 3920 to 3923
铆钉盲板AGS 3920至3923的安装信息
1970-01-19
DIN 1434-2
Clevis pins with small head, blank, 26 to 100 mm diameter
直径为26至100 mm的小头盲板U形夹销
1938-10-01
DIN 1434-1
Clevis pins with small head, blank, 3 to 25 mm diameter
直径为3至25 mm的小头盲板U形夹销
1956-03-01
GOST 19186-1981
Доски приборные кабин самолетов с двумя летчиками. Требования к компоновке и установке приборных досок летчиков
带两名飞行员的飞行甲板显示板 显示板布置和设置的要求
MIL MIL-F-81177/1 Notice 2-Cancellation
FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, DESIGN & USAGE LIMITATIONS FOR (S/S BY NASM81177/1-1999)
合金钢高强度盲板紧固件的设计和使用限制
1999-02-22
KS C IEC 60335-2-17(2024 Confirm)
가정용 및 이와 유사한 전기기기의 안전성 — 제2-17부: 담요, 패드, 의류 및 이와 유사한 유연성을 가진 전열기기의 개별 요구사항
家用和类似用途电器安全第2-17部分:盲板的特殊要求
2014-03-05
ADS TS117
Manufacturing & Inspection Requirements for Rivet, Blind, Self- Plugging, Flush Break, Mechanically Locked Spindle. Aluminium Alloy (2014 Material)
铆钉、盲板、自插拔、齐平断裂、机械锁定主轴的制造和检验要求 铝合金（2014材质）
2004-12-01
BS ISO 11110-2015
Winter-sports equipment. Test devices for the setting of the functional unit ski/boot/binding. Requirements and tests
冬季运动器材 功能单元滑雪板/靴子/捆绑设置的测试设备 要求和测试
2015-08-31
SAE TS117-4
TS117 Manufacturing and Inspection Requirements for Rivet, Blind, Self- Plugging, Flush Break, Mechanically Locked Spindle Aluminium Alloy (2014 Material)
TS117铆钉、盲板、自塞、平开、机械锁紧主轴铝合金的制造和检验要求（2014材料）
2004-12-01
NASM 8975/1
Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant and Heat Resistant Steel and Titanium, Design and Usage Limitations for
高强度安装成型耐腐蚀耐热钢和钛制盲板紧固件的设计和使用限制
1999-04-01
MIL MIL-F-81177/1
FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED, ALLOY STEEL, DESIGN & USAGE LIMITATIONS FOR (S/S BY NASM81177/1-1999)
高强度安装成型合金钢盲板紧固件的设计和使用限制（NASM81177/1-1999标准S/S）
1980-10-30
MIL MIL-F-8975/1A Notice 2-Cancellation
FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT AND HEAT RESISTANT STEEL AND TITANIUM, DESIGN AND USAGE LIMITATIONS FOR (SUPERSEDING MIL-F-8975/1) (S/S BY NASM8975/1-1999)
高强度盲板紧固件 安装成型 耐腐蚀和耐热钢和钛 （取代MIL-F-8975/1）的设计和使用限制
1999-04-06
MIL MIL-F-8975/1A Notice 1-Validation
FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT AND HEAT RESISTANT STEEL AND TITANIUM, DESIGN AND USAGE LIMITATIONS FOR (SUPERSEDING MIL-F-8975/1) (S/S BY NASM8975/1-1999)
高强度盲板紧固件 安装成型 耐腐蚀和耐热钢和钛 （取代MIL-F-8975/1）的设计和使用限制
1991-09-24
MIL MIL-PRF-31032/1B Amendment 1
PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND BURIED PLATED THROUGH HOLES, FOR SOLDERED PART MOUNTING (SUPERSEDING MIL-PRF-31032/1A)
印刷线路板 多层 热固化树脂基材 具有或不带有盲孔和被覆盖的套管 用于焊接部分安装（取代MIL-PRF-31032/1A）
2006-02-24
ADS TS38
Manufacturing & Inspection Requirements for Rivets, Blind, Self-plugging, Flush Breaks, mechanically Locked Stem, Corrosion Resisting Steel, plain and cadmium plated (AS46788 thru AS46791), (AS49788L thru AS46791L)
普通镀镉耐蚀钢（AS46788至AS46791）（AS49788L至AS46791L）铆钉、盲板、自插式、齐平断裂、机械锁定阀杆的制造和检验要求
2004-12-01
SAE TS251-2
TS251 Manufacturing, Inspection and Qualification Requirements for Rivet, Blind, Self-Plugging, Flush-Break, Mechanically Locked Stem, Aluminum Alloy (2014a Material) AS64400 and AS64403 AS64400L and AS64403L
TS251铝合金（2014a材料）AS64400和AS64403 AS64400L和AS64403L的铆钉、盲板、自插式、平头断裂、机械锁定阀杆的制造、检验和鉴定要求
2016-04-07
MIL MIL-F-8975/1A
FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED, CORROSION RESISTANT AND HEAT RESISTANT STEEL AND TITANIUM, DESIGN AND USAGE LIMITATIONS FOR (SUPERSEDING MIL-F-8975/1) (S/S BY NASM8975/1-1999)
高强度安装成型耐腐蚀耐热钢和钛制盲板紧固件的设计和使用限制（取代MIL-F-8975/1）（由NASM8975/1-1999提供）
1982-09-29
SAE TS250-2
TS250 Manufacturing, Inspection and Qualification Requirements for Rivet, Blind, Self-Plugging, Flush-Break, Mechanically Locked Stem, Corrosion Resisting Steel, Plain and Cadmium Plated AS64401, AS64402, AS64404 and AS64405 AS64401L, AS64402L, AS64404L and AS64405L
TS250铆钉、盲板、自插式、平头断裂、机械锁定阀杆、耐蚀钢、普通和镀镉AS64401、AS64402、AS64404和AS64405 AS64401L、AS64402L、AS64404L和AS64405L的制造、检验和鉴定要求
2016-04-07