MIL MS51991D
Insert, Screw Thread-Locked in, Ring Locked, Serrated
镶块 螺纹锁紧 环锁紧 锯齿形
2012-11-14
MIL MS51991D Amendment 1
Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形
2015-08-20
MIL MS51991D Notice 1-Validation 1
Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形
2020-05-26
GB/T 13576.4-2008
锯齿形（3°、30°）螺纹 第4部分：公差
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances
2008-07-30
MIL MS51998
INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
嵌件 螺纹锁紧 环锁紧 锯齿形 设计和使用限制
1967-12-12
GB/T 13576.1-2008
锯齿形（3°、30°）螺纹 第1部分：牙型
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles
2008-07-30
GB/T 13576.3-2008
锯齿形（3°、30°）螺纹 第3部分：基本尺寸
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions
2008-07-30
UNE 18074-1960
INDENTED WHEEL FOR SILENT CHAINS.
用于无声链条的锯齿形车轮
1960-06-15
MIL MS51991C Amendment 1
INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED (SUPERSEDING MS51991B)
锯齿形锁紧环内螺纹嵌件（取代MS51991B）
1997-08-06
GB/T 32537-2016
梯形和锯齿形螺纹收尾、肩距、退刀槽和倒角
Runouts, undercuts and chamfers for trapezoidal and buttress threads
2016-02-24
NASM 45909 Rev.2
Stud, Locked in, Ring Locked, Serrated, General Specification for
锯齿形锁紧环形螺柱通用规范
2016-05-31
CID A-A-51840A
SCISSORS, EAR, SERRATED (JOSEPH) (SUPERSEDING A-A-51840)
锯齿形耳剪（约瑟夫）（取代A-A-51840）
1989-06-06
BS EN 3064-1996
Shank nuts, self-locking, serrated. Installation procedure
锯齿形自锁柄螺母 安装程序
1996-10-15
MIL MS51498
INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿形 高强度 超大替换件
1985-03-11
GB/T 13576.2-2008
锯齿形（3°、30°）螺纹 第2部分：直径与螺距系列
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan
2008-07-30
T/CIPR 009-2023
可调节弧度的锯齿形铝合金模板
2023-02-13
MIL MS51551
STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧 锯齿形 UNJF螺纹螺母端 增加螺柱端长度
1987-05-12
BS 4638-1970
Specification for carbon steel wire for zigzag and square-form springs
锯齿形和方形弹簧用碳素钢线规范
1970-10-22
MIL MS51990B Amendment 3
RING, LOCK, SERRATED (SUPERSEDING MS51990A) (S/S BY A-A-59558)
锯齿形锁紧环（取代MS51990A）（由A-A-59558制成）
1997-10-20
MIL MS51990B Notice 1-Cancellation
RING, LOCK, SERRATED (SUPERSEDING MS51990A) (S/S BY A-A-59558)
锯齿形锁紧环（取代MS51990A）（由A-A-59558制成）
2000-06-23