SAE AMS2770R
Heat Treatment of Wrought Aluminum Alloy Parts
锻铝合金零件热处理
2020-08-20
SAE AMS2801D
Heat Treatment of Titanium Alloy Parts
钛合金零件热处理
2024-03-01
HB 7750-2004
钛合金零件真空热处理
Vacuum heat treatment of titanium alloy parts
2004-09-01
SAE AMS2774H
Heat Treatment, Nickel Alloy and Cobalt Alloy Parts
热处理镍合金和钴合金零件
2024-08-29
SAE AMS2773F
Heat Treatment, Cast Nickel Alloy and Cobalt Alloy Parts
热处理 铸造镍合金和钴合金零件
2022-04-22
SAE AMS2728C
Heat Treatment of Wrought Copper Beryllium Alloy Parts
锻造铜铍合金零件的热处理
2012-09-13
GOST R 59673-2021
Оптика и фотоника. Лазерная термическая обработка деталей из титановых и алюминиевых сплавов. Технологический процесс
光学与光子学 钛和铝合金零件的激光热处理 工艺流程
HB 8745-2023
航空钛合金零件激光选区熔化增材制造制件热处理
2023-12-29
SAE AMS4335A
Forgings, Aluminum Alloys, 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness
锻造铝合金2xxx和7xxx 热处理 成品零件性能:短横向拉伸性能和断裂韧性
2017-01-03
SAE AMS4938B
Forgings, Titanium Alloys, Heat-Treated, Finished-Part Properties: Short-Traverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension
锻造 钛合金热处理 成品零件性能:短程拉伸 断裂韧性和纵向时间依赖张力
2024-11-06
SAE ARP1524A
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding
高耐久性结构胶粘剂用铝合金零件的表面处理及底漆
1990-10-01
SAE AMS2759/1J
Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
碳钢和低合金钢零件的热处理最低抗拉强度低于220 ksi（1517 MPa）
2021-08-03
SAE ARP1575C
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding Hand Applied Phosphoric Acid Anodizing
铝合金零件表面处理和起泡耐久性高结构粘合剂手用磷酸阳极氧化
2017-09-20
BS 09/30181195 DC
BS 3B 25. Specification for copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)
BS 3B 25 铜镍硅合金棒材、型材、锻坯、锻件和零件（热处理）规范
2009-04-30
SAE AMS2759/2K
Heat Treatment of Low-Alloy Steel Parts, Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
最低抗拉强度220ksi（1517mpa）及以上的低合金钢零件的热处理
2021-07-07
BS 94/714539 DC
Aerospace series. Test method. Wrought heat reisting alloys semi-finished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects (prEN 2950)
航空航天系列 测试方法 锻造热处理合金半成品和零件 宏观和微观检查的条件 结构和缺陷图集（prEN 2950）
1994-12-16