作废 SH/T 0641-1997
电接点润滑脂 电接点润滑脂 Lubricating greases for electric contacting point
发布日期:1997-07-12
实施日期:1997-12-01
分类信息
研制信息

归口单位: 合成润滑油脂标准化技术归口单位

起草单位: 长城高级润滑油公司

起草人: 金中令、 薛玉苓

标准简介

本标准规定了电接点润滑脂的技术条件、检验方法、包装、储运及采样规则。本标准适用于电接点润滑脂

相似标准/计划/法规
GB/T 4929-1985
润滑脂滴点测定法
Lubricating grease--Determination of dropping point
1985-02-06
UNE 51008-1978
PETROLEUM PRODUCTS, LUBRICATING GREASE. DETERMINATION OF DROPPING POINT
石油产品、润滑脂 滴点的确定
1978-09-15
BS ISO 2176-1995+A1-2020
Petroleum products. Lubricating grease. Determination of dropping point
石油产品 润滑脂 滴点的确定
2020-04-27
KS M ISO 2176
석유제품 — 윤활 그리스 — 적점 시험방법
石油产品——润滑脂——滴点的确定
2024-12-06
GOST ISO 2176-2013
Нефтепродукты. Смазки пластичные. Определение температуры каплепадения
石油产品 润滑脂滴点测定
2013-11-05
ISO 2176-1995
Petroleum products — Lubricating grease — Determination of dropping point
石油产品——润滑脂——滴点的确定
1995-03-16
JB/T 8810.3-2016
油脂润滑泵 第3部分:多点润滑泵(31.5MPa)
Grease lubrication pumps-Part 3:Multiple-point lubrication pumps(31.5MPa)
2016-01-15
GOST 32322-2013
Смазки пластичные. Определение температуры каплепадения в широком диапазоне температур
润滑脂在宽温度范围内测定滴点
2013-09-27
ISO 22286-2018
Petroleum products and lubricants - Determination of the dropping point of grease with an automatic apparatus
石油产品和润滑剂.用自动装置测定润滑脂滴点
2018-10-25
ISO 2176-1995/Amd 1-2020
Petroleum products — Lubricating grease — Determination of dropping point — Amendment 1
石油产品.润滑脂.滴点的测定.修改件1
2020-03-11
JB/T 8810.1-2016
油脂润滑泵 第1部分:电动润滑泵(40MPa)
Grease lubrication pumps-Part 1:Electrical lubrication pumps (40MPa)
2016-01-15
DIN ISO 2176
Petroleum products - Lubricating grease - Determination of dropping point (ISO 2176:1995)
石油产品润滑脂滴点的测定
1997-05-01
GB/T 3498-2008
润滑脂宽温度范围滴点测定法
Petrolum products - Determination of dropping point of lubricating greases (wide temperature range )
2008-06-23
JB/T 12697-2016
免加脂电动润滑泵(20MPa)
No manual greasing electric lubrication pumps(20 MPa)
2016-01-15
ASTM D2265-22
Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
宽温度范围内润滑脂滴点的标准试验方法
2022-04-01
DIN 51810-3
Testing of lubricants - Testing of rheological properties of lubricating greases - Part 3: Determination of flow point with inclining rod method
润滑剂试验润滑脂流变性能试验第3部分:用斜杆法测定流动点
2016-08-01
DIN ISO 22286
Petroleum products and lubricants - Determination of the dropping point of grease with an automatic apparatus (ISO 22286:2018)
石油产品和润滑剂.用自动仪器测定润滑脂滴点(ISO 22286-2018)
2020-09-01
BS 2000-132-1996
Methods of test for petroleum and its products-Petroleum products. Lubricating grease. Determination of dropping point
石油及其产品的试验方法 石油产品 润滑脂 滴点的确定
1996-07-15
ISO 13227-2025
Petroleum products and lubricants — Rheological properties of lubricating greases — Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
石油产品和润滑剂 润滑脂的流变特性 用带有平行板测量系统的振荡流变仪测定流动点
2025-03-18
QPL QPL-29608 Notice 1-Administrative
CLEANING AND CLEANING-LUBRICATING COMPOUNDS, ELECTRICAL CONTACT
清洁和清洁-润滑化合物、电触点
2016-11-02
接点

最后更新时间 2025-08-29