QJ 1367-1988
固体火箭发动机燃烧室壳体弯曲试验方法
1988-02-29
QJ 1368-1988
固体火箭发动机燃烧室壳体外压试验方法
1988-02-29
QJ 1392A-2005
固体火箭发动机燃烧室壳体内压试验方法
QJ 1412-1988
固体火箭发动机燃烧室壳体轴压试验方法
1988-03-22
CB 20409-2018
舰船燃气轮机燃烧室火焰筒与旋流器吹风试验方法
MIL MIL-PRF-62550/2A Notice 1-Validation
HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT (SUPERSEDING MIL-H-62550/2)
燃烧室加热器总成（代替MIL-H-62550/2）
2004-04-20
QJ 3199-2004
固体火箭发动机燃烧室壳体通用规范
General specification for chamber case of solid rocket motor
2004-09-01
T/SHMHZQ 152-2021
基于增材制造技术的发动机燃烧室设计规程
2021-12-28
QJ 1453A-2004
固体火箭发动机燃烧室药柱通用规范
General specification for chamber grain of solid rocket motor
2004-09-01
ASTM D7668-25
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
用定容燃烧室法测定柴油十六烷值（DCN）的标准试验方法——点火延迟和燃烧延迟
2025-07-01
NB/SH/T 6035-2021
柴油导出十六烷值的测定 定容燃烧室着火滞后和燃烧滞后法
Standard test method for determination of derived cetane number (DCN) of diesel fuel oils—Ignition delay and combustion delay using a constant volume combustion chamber method
2021-11-16
MIL MIL-PRF-62550/2C
HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT (SUPERSEDING MIL-H-62550/2B)
燃烧室加热器总成（取代MIL-H-62550/2B）
2016-09-27
QJ 2609-1994
固体火箭发动机燃烧室高能X射线探伤方法
1994-03-26
SAE CECF-20-T-96
Deposit Forming Tendency on Intake Valves and in Combustion Chambers of Gasoline Engines
汽油机进气门和燃烧室沉积物的形成趋势
1995-11-01
MIL MIL-PRF-62315C
HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT, 60 000 BTU/HR (SUPERSEDING MIL-H-62315B)
燃烧室加热器总成 6000Btu/HR（取代MIL-H-62315B）
1997-07-25
MIL MIL-PRF-62550E Amendment 1
Heater Assembly, Combustion Vehicular Compartment, 8.8/17.6KW (30,000/60,000 BTU/HR), General Specification for
8.8/17.6KW（30000/60000 BTU/HR）燃烧室加热器组件 通用规范
2017-07-13
MIL MIL-PRF-62550E Notice 1-Validation 1
Heater Assembly, Combustion Vehicular Compartment, 8.8/17.6KW (30,000/60,000 BTU/HR), General Specification for
8.8/17.6KW（30000/60000 BTU/HR）燃烧室加热器组件 通用规范
2011-11-29
CH-15-035
Optimizing Performance and Emissions of Diesel/LPG Fuel Mixture in a Combustor Nozzle--Using Computer Numerical Techniques
优化燃烧室喷嘴内柴油/液化石油气混合燃料的性能和排放——使用计算机数值技术
QJ 3292-2007
固体火箭发动机燃烧室壳体焊缝X射线实时成像检测方法
Testing method of X-ray real-time radioscopy for solid rocket motor burning room weld
2007-05-22