作废 HG/T 20637.3-1998
仪表设计规定的编制 仪表设计规定的编制 Preparation of instrumentation engineering specification
发布日期:1998-06-22
实施日期:1999-01-01
分类信息
标准简介

1.0.1本规定用作指导自控设计人员编制工程项目的仪表设计规定,或者指导设计人员对本规定附录A仪表设计规定(通用)进行选择和补充,形成工程项目的仪表设计规定。 1.0.2仪表设计规定是工程项目中本专业的统一规定,既向用户阐述其设计的基本原则,又用于指导所有参加此工程的自控设计人员的设计工作。设计规定在本公司内部和用户之间使用,也可以发给制造厂商

相似标准/计划/法规
T/UNP 777-2025
建筑工程投资估算编制规范
Specification for preparation of investment estimation in building engineering
2025-07-22
SH/T 3081-2019
石油化工仪表接地设计规范(附条文说明)
Design specification for instrumentation earthing in petrochemical engineering
2019-08-02
HJ 526-2010
环境工程技术规范制订技术导则
Technical guideline on preparing environmental engineering technical specification
2010-02-22
T/CCPITBSC 077-2025
水利工程施工组织设计编制规范
Specifications for the preparation of construction organization design for hydraulic engineering
2025-07-29
GB/T 15406-2007
岩土工程仪器基本参数及通用技术条件
Primary parameter and general specification for geotechnical engineering instrument
2007-06-11
GB/T 32746-2016
岩土工程仪器信号与接口
General specification of signals and interfaces for geotechnical engineering instruments
2016-06-14
NB/T 51042-2015
选煤厂建筑工程施工与验收规范
The Specification for Construction and Acceptance of Architectural Engineering in Coal Preparation Plant
2015-10-27
JJF 1375-2024
机动车发动机转速测量仪校准规范
Calibration Specification for Motor Vehicle Engine Speed Measuring Instruments
2024-09-18
GB/T 13606-2007
土工试验仪器 岩土工程仪器 振弦式传感器通用技术条件
Instrument for geotechnical engineering - General specifications of vibrating wire sensor
2007-06-11
T/CMEEEA 008-2025
化工仪表及控制供电系统设计规范
Design specification for instrumentation and control power supply systems in chemical engineering
2025-07-10
JJF 2045-2023
机动车发动机转速测量仪校准装置校准规范
Calibration Specification for Calibrators of Motor Vehicle Engine Speed Measuring Instruments
2023-06-30
GB/T 34807-2017
岩土工程仪器设备的检验测试通用技术规范
General technical specifications for inspection and test of geotechnical engineering instruments & equipment
2017-11-01
CECS 162-2004
给水排水仪表自动化控制工程施工及验收规程(附条文说明)
Specification for construction and acceptance of instrumentation automation control engineering in water supply and wastewater
SY/T 4129-2014
输油输气管道自动化仪表工程施工技术规范
Technical specification for construction of automation instrumentation engineering of the oil and gas transportation pipeline
2014-10-15
BS PD 6501-5-1990
The preparation of British Standards for building and civil engineering-Guide to technical committees on the preparation of performance specifications in British Standards for construction products
英国建筑和土木工程标准的制定 英国建筑产品标准中性能规范编制技术委员会指南
1990-07-31
MIL MIL-E-25110
ENGINE, AIRCRAFT, RECIPROCATING, MODEL SPECIFICATION FOR (OUTLINE & INSTRUCTIONS FOR PREPARATION) (NO S/S DOCUMENT)
往复式飞机发动机型号规范(大纲和准备说明)(无S/S文件)
1955-02-07
EU 363-2017
Commission Regulation (EU) 2017/363 of 1 March 2017 amending Regulation (EU) No 965/2012 as regards the specific approval of single-engined turbine aeroplane operations at night or in instrument meteorological conditions and the approval requirements for the dangerous goods training relating to commercial specialised operations, non-commercial operations of complex motor-powered aircraft and non-commercial specialised operations of complex motor-
2017年3月1日委员会第2017/363号法规(EU)修订了第965/2012号法规(EU) 该法规涉及单引擎涡轮飞机夜间或仪表气象条件下运行的具体批准 以及与商业专业操作相关的危险品培训的批准要求 复杂电机驱动飞机的非商业运营和复杂电机的非商业专业运营-
2017-03-01
仪表设计编制

最后更新时间 2025-08-30