GB/T 25298-2010
电阻焊机控制器 通用技术条件
The general specifications for resistance welding controller
2010-11-10
1A1W1S1 Archive Product 432
Specification for Resistance Welding Controls
电阻焊接控制规范
GB/T 37792-2019
耐蚀合金焊管通用技术条件
General specification for welded corrosion resistant alloy pipes and tubes
2019-08-30
JIS C 9323-1999
Electric resistance welding -- Transformers -- General specifications applicable to all transformers
电阻焊变压器适用于所有变压器的通用规范
1999-01-01
BS EN ISO 5826-2014
Resistance welding equipment. Transformers. General specifications applicable to all transformers
电阻焊接设备 变形金刚 适用于所有变压器的通用规范
2014-02-28
KS C ISO 5826
저항 용접기 — 변압기 —모든 변압기에 적용되는 일반 시방서
电阻焊接设备 - 变压器 - 一般规格适用于所有变压器
2021-01-26
GB/T 25301-2021
电阻焊设备 变压器 适用于所有变压器的通用技术条件
Resistance welding equipment—Transformers—General specifications applicable to all transformers
2021-05-21
ISO 5826-2014
Resistance welding equipment — Transformers — General specifications applicable to all transformers
电阻焊设备——变压器——适用于所有变压器的一般规范
2014-02-10
UNE-EN ISO 5826-2004
Resistance welding equipment. Transformers. General specifications applicable to all transformers (ISO 5826:1999)
电阻焊接设备 变形金刚 适用于所有变压器的一般规范（ISO 5826-1999）
2004-01-30
DIN EN ISO 5826
Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
电阻焊设备.变压器.适用于所有变压器的一般规范（ISO 5826-2014）；德文版EN ISO 5826:2014
2014-07-01
MIL MIL-B-2530 Notice 1-Cancellation
BOMBS, STEEL, G.P. AND S.A.P. BUTT RESISTANCE WELDED GENERAL SPECIFICATIONS FOR THE CONSTRUCTION OF (NO S/S DOCUMENT)
钢制炸弹、G.P.和S.A.P.对接电阻焊结构通用规范（无S/S文件）
1979-10-19
ETSI TS 101 376-4-14
GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 4: Radio interface protocol specifications; Sub-part 14: Mobile Earth Station (MES) - Base Station System (BSS) interface; Radio Link Control/Medium Access Control (RLC/MAC) protocol
GEO移动无线电接口规范（第3版）；第三代卫星分组无线电业务；第4部分:无线电接口协议规范；第14子部分:移动地球站（MES）-基站系统（BSS）接口；无线链路控制/媒体访问控制（RLC/MAC）协议
2015-10-01
BS 9612 N019-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为17至75 MHz 第三泛音厚度剪切模式 切割时 用于窄温度范围内的操作（温度控制） 全面评估水平
1979-04-15
BS 9612 N021-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为50至125 MHz 第五泛音厚度剪切模式 切割时 用于窄温度范围内的操作（温度控制） 全面评估水平
1979-04-15
BS 9612 N020-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为50至125 MHz 第五泛音厚度剪切模式 切割时 适用于宽温度范围（非温度控制）的操作 全面评估水平
1979-04-15
BS 9612 N018-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为17至75 MHz 第三泛音厚度剪切模式 切割时 用于宽温度范围（非温度控制）的操作 全面评估水平
1979-04-15
BS 9612 N017-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式 切割时 用于窄温度范围内的操作（温度控制） 全速
1979-04-15
BS 9612 N016-1979
Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳 频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式 切割时 适用于宽温度范围（非温度控制）的操作 完全一样
1979-04-15