JB/T 8105.2-2015
真空技术 真空规管接头 第2部分:金属密封
Vacuum technology - Connector of vacuum gauges - Part 2:Metal seal
2015-10-10
JB/T 8105.1-2015
真空技术 真空规管接头 第1部分：橡胶密封
Vacuum technology - Connector of vacuum gauges - Part 1:Rubber seal
2015-10-10
SJ 1769-1981
真空设备金属钟罩 封头
Metallic bell cover for vacuum equipment. Sealing head
1981-03-27
SJ 1771-1981
真空设备金属钟罩 密封圈
Metallic bell cover for vacuum equipment. Sealing collar
1981-03-27
SJ/T 10161.1-1991
真空橡胶密封平面法兰
Vacuum rubber seal plane flanges--Connection types and basic dimensions
1991-04-02
GB/T 14034.3-2024
液压传动连接 金属管接头 第3部分:端面密封
Connections for hydraulic fluid power—Metallic tube connections—Part 3:Face seal
2024-06-29
BS EN ISO 9974-3-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with metal-to-metal sealing (type B)
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-08-15
ISO 9974-3-1996
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第3部分:金属对金属密封螺柱端（B型）
1996-04-18
MIL AN901-8 Notice 1-Inactivation
GASKET & METAL TUBE CONNECTION SEAL (SUPERSEDING AN901-7)(S/S BY AN901-9)
垫圈和金属管连接密封件（代替AN901-7）（由AN901-9代替）
1997-06-16
BS ISO 8434-3-2005
Metallic tube connections for fluid power and general use-O-ring face seal connectors
流体动力和一般用途的金属管接头
2005-09-02
JB/T 966-2005
用于流体传动和一般用途的金属管接头 O形圈平面密封接头
Metallic tube connections for fluid power and general use -- O-ring face seal fittings
2005-05-18
BS EN ISO 9974-2-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Stud ends with elastomeric sealing (type E)
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-08-15
UNE 125100-1992
LIGHT GAUGE METAL CONTAINERS. HERMETICALLY SEALED METAL CONTAINERS FOR FOODS AND DRINKS. DIMENSIONS AND CAPACITIES OF ROUND OPEN-TOP CANS FOR GENERAL FOODS.
轻型金属容器 食品和饮料的密封金属容器 普通食品用圆形开口罐的尺寸和容量
1992-05-20
GB/T 19674.3-2005
液压管接头用螺纹油口和柱端 金属对金属密封柱端（B型）
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B)
2005-02-21
UNE-EN ISO 9974-3-2001
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO METAL SEALING - PART 3: STUD ENDS WITH METAL-TO-METAL SEALING (TYPE B). (ISO 9974-3:1996).
通用和流体动力连接件.带ISO 261螺纹的弹性或金属对金属密封端口和螺柱端.第3部分:带金属对金属密封（B型）的螺柱端 （ISO 9974-3-1996）
2001-05-22
ISO 1179-4-2007
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
通用和流体动力连接件——带ISO 228-1弹性体或金属对金属密封螺纹的端口和螺柱端第4部分:仅用于金属对金属密封的通用螺柱端（B型）
2007-08-13
BS EN ISO 9974-1-2000
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2000-09-15
ISO 9974-2-1996
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
通用和流体动力连接件——ISO 261螺纹弹性体或金属对金属密封端口和螺柱端第2部分:弹性体密封螺柱端（E型）
1996-04-18
ISO 8434-3-2005
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
流体动力和通用金属管接头第3部分:O形圈端面密封接头
2005-06-29
BS EN ISO 1179-1-2013
Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing-Threaded ports
一般用途和流体动力的连接 端口和螺柱端部采用ISO 228-1螺纹 采用弹性体或金属对金属密封
2013-11-30