JB/T 9744-2010
内燃机 零、部件磁粉检测
Internal combustion engines——Magnetic particle inspection for parts and commponents
2010-02-11
JB/T 6729-2007
内燃机 曲轴、凸轮轴磁粉探伤
Internal combustion engines--Magnetic particle inspection for crankshafts and camshafts
2007-08-28
JB/T 6012.3-2008
内燃机 进、排气门 第3部分: 磁粉探伤
Internal combustion engines--Intake and exhaust valves--Part 3:Magnetic particle testing
2008-06-04
JB/T 6721.2-2007
内燃机 连杆 第2部分：磁粉探伤
Internal combustion engines-connecting-rods--Part 2:Magnetic particle inspection
2007-08-28
JB/T 7293.4-2010
内燃机 螺栓与螺母 第4部分：连杆螺栓 磁粉检测
Internal combustion engines——Bolts and nuts——Part 4:Connecting rod bolts——Magnetic particle testing
2010-02-21
JB/T 12210-2015
内燃机 空气滤清器 （粒子计数法）分级滤清效率试验方法
Internal combustion engines - Air cleaners - Fractional efficiency testing (using particle counting)
2015-04-30
JB/T 11784-2014
往复式内燃机 大功率柴油机 连续纤维锻钢曲轴 检验方法：湿法连续法磁粉检测
Reciprocating internal combustion engines - High power diesel engine - Continuous grain flow forged steel crankshaft - Inspection method:Wet-process continuous magnetic particle inspection
2014-05-12
BS ISO 4548-12-2017
Methods of test for full-flow lubricating oil filters for internal combustion engines-Filtration efficiency using particle counting and contaminant retention capacity
内燃机全流量润滑油过滤器的试验方法
2017-07-11
BS 7403-4-1998
Full-flow lubricating oil filters for internal combustion engines-Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
内燃机用全流量润滑油过滤器 初始颗粒保留效率、寿命和累积效率的试验方法（重量分析法）
1998-03-15
KS R ISO 4548-12(2017 Confirm)
내연 기관용 전류식 윤활유 필터 시험 방법 - 제12부 : 입자 계수 방법을 이용한 여과 효율 및 오염 물질 포획 용량
内燃机全流式润滑油过滤器试验方法第12部分:颗粒计数过滤效率和污染物截留能力
2007-12-28
KS R ISO 4548-12
내연 기관용 전류식 윤활유 필터 시험 방법 — 제12부: 입자 계수를 이용한 여과 효율과 오염 물질 포획 용량
内燃机用全流量润滑油过滤器的试验方法.第12部分:使用颗粒计数的过滤效率和污染物保持能力
2022-12-22
GB/T 8243.12-2021
内燃机全流式机油滤清器试验方法 第12部分：颗粒计数法滤清效率和容灰量
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity
2021-05-21
ISO 4548-12-2017
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity
用于内燃机的全流量润滑油过滤器的测试方法 - 第12部分:使用粒子计数的过滤效率和污染物保留能力
2017-05-03
KS R ISO 4548-4(2017 Confirm)
내연 기관용 전류식 윤활유 필터 시험방법－제4부：초기 입자 포집 효율, 수명 및 누적 효율(중량법)
试验方法用于全流式机油滤清器用于内燃发动机的第4部分:初始颗粒截留效率 寿命和累积效率（重量法）
2007-11-30
KS R ISO 4548-4(2022 Confirm)
내연 기관용 전류식 윤활유 필터 시험방법－제4부：초기 입자 포집 효율, 수명 및 누적 효율(중량법)
内燃机全流量润滑油过滤器试验方法第4部分:初始颗粒保留效率、寿命和累积效率（重量法）
2007-11-30
GB/T 8243.4-2003
内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率（重量法）
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method)
2003-04-15
ISO 4548-4-1997
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
内燃机全流式润滑油滤清器的试验方法第4部分:初始颗粒保留效率、寿命和累积效率（重量分析法）
1997-11-27
ISO/TS 19713-1-2010
Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 1: Fractional efficiency testing with fine particles (0,3 μm to 5 μm optical diameter)
道路车辆——内燃机和压缩机用进气净化设备第1部分:细颗粒（0.3m至5m光学直径）的分级效率试验
2010-07-16
ISO/TS 19713-2-2010
Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 2: Fractional efficiency testing with coarse particles (5 μm to 40 μm optical diameter)
道路车辆——内燃机和压缩机用进气净化设备第2部分:粗颗粒（5 m至40 m光学直径）的分级效率试验
2010-07-16
BS 08/30171660 DC
BS ISO 19713-2. Inlet air cleaning equipment for internal combustion engines and compressors. Part 2. Fractional efficiency testing with coarse particles (5 micrometers m to 40 micrometers m optical diameter)
BS ISO 19713-2 内燃机和压缩机的进气净化设备 第二部分 利用粗颗粒（5微米至40微米光学直径）进行的部分效率测试
2008-08-13