KS M ISO 7822(2022 Confirm)
유리섬유강화 플라스틱-공동률의 측정-연소 감량,기계적 분석 및 통계적 계수법
纺织玻璃钢.空隙含量的测定.灼烧损失、机械分解和统计计数方法
2002-05-31
BS 2782-10-METHOD 1006-1978
Methods of testing plastics. Glass reinforced plastics-Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric
塑料的试验方法 玻璃钢
1978-10-31
SC/T 8125-2003
玻璃钢渔船船体密性试验方法
Test method of hull tightness for fiberglass reinforced plastic fishing vessel
2003-12-01
SC/T 8062-2000
玻璃钢渔船总纵弯曲试验方法
Test method for overall longitudinal bending of glass fiber reinforced plastics fishing vessel
2000-02-22
KS M ISO 10466
유리 섬유 강화 열경화성 플라스틱(GRP)관 — 원주 방향 초기 변형에 대한 저항성 시험방법
玻璃钢热固性塑料（GRP）管耐初始环挠度的试验方法
2023-11-14
ASTM C536-83(2023)
Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
用电气试验法测定玻璃钢设备涂层连续性的标准试验方法
2023-05-01
ASTM C537-87(2023)
Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
用高压法测定玻璃钢反应设备上玻璃涂层可靠性的标准试验方法
2023-05-01
GOST R 55875-2013
Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы испытаний. Испытания болтового фланцевого соединения
玻璃钢热固性塑料（GRP）管和配件 验证螺栓法兰接头设计的试验方法
ISO 8521-2020
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
玻璃钢热固性塑料（GRP）管.测定初始周向拉伸壁强度的试验方法
2020-07-09
GOST R 55877-2013
Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы испытаний. Определение износостойкости внутренней поверхности
玻璃钢热固性塑料（GRP）管和配件 用砂轮测定耐磨性的试验方法
GOST R 55876-2017
Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы испытаний. Испытания на герметичность подвижных соединений
玻璃钢热固性塑料管及部分管道 挠性接头密封性试验方法
ISO 8639-2023
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
玻璃钢热固性塑料（GRP）管和配件.柔性接头的密封性和结构设计验证的试验方法
2023-04-25
BS EN 976-1-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels-Requirements and test methods for single wall tanks
玻璃钢（GRP）地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 单壁储罐的要求和试验方法
1997-12-15
GOST R 57781-2017
Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы контроля конструкции раструбно-замковых соединений и соединений при помощи двойного раструба с эластомерными уплотнителями
玻璃钢热固性塑料管及部分管道 证明带弹性密封件的锁紧承插接头（包括双承插接头）设计的试验方法
UNE-EN 976-1-1998
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
玻璃钢（GRP）地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法
1998-07-29
UNE-EN 976-1-1999 ERRATUM
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
玻璃钢（GRP）地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法
1999-06-14
BS 976-3-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 3. Requirements and test methods for double wall tanks
玻璃钢（GRP）地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第三部分 双壁储罐的要求和试验方法
1997-06-26
AFNOR NF EN 976-1
Underground Tanks of Glass-Reinforced Plastics (GRP). Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels. Part 1 : Requirements and Test Methods for Single Wall Tanks - FRENCH ONLY
玻璃钢（GRP）地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法-仅限法国
1997-09-01