DIN 388-1
Hand-wheels of plastic with ripple ring
带波纹环的塑料手轮
1996-01-01
DIN 3220
Hand-wheels, flat type - Hub hole with tapered square
平面手轮-带锥形方形的轮毂孔
2002-04-01
DIN 3319
Hand-wheels, dished - Hub hole with tapered square
带锥形方形轮毂孔的碟形手轮
2002-04-01
DIN 390
Hand-wheels, dished - Hub hole with straight square
带直方形轮毂孔的碟形手轮
2002-04-01
HB 564-1989
带孔套筒
1989-05-13
NAS 0332 Rev.1
Bearing Retention Sleeve, Grooved Outer Face
带槽外表面的轴承固定套筒
2012-07-31
DIN 34823
Raised countersunk head screws with 12 point socket
带12点套筒的凸面沉头螺钉
2005-11-01
DIN 43858
Screw driver bit with finder sleeves for watthour meter
电能表用带定位套筒的螺丝刀头
1982-11-01
DIN 235-1
Metric taper gauges; taper plug gauges for taper sockets with drift slot
公制锥度规；带漂移槽的锥形套筒用锥形塞规
1982-08-01
GOST 8545-1975
Подшипники шариковые и роликовые двухрядные с закрепительными втулками. Типы и основные размеры
滚珠和滚子轴承带锥形套筒 类型和边界尺寸
UNE 15214-1990
MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. DRILLING UNITS WITH SLIDING SLEEVE.
机床结构的模块化单元 带滑动套筒的钻井装置
1990-11-13
MIL MIL-H-36887 Notice 1-Cancellation
HANDPIECE, DENTAL, CONTRA-ANGLE, WITH FRICTION GRIP CHUCK, ROUND SLEEVE (NO S/S DOCUMENT)
手持件 牙科 对角 带摩擦夹盘 圆套筒（无S/S文件）
1989-08-07
GOST 22843-1977
Втулки разрезные для инструмента с цилиндрическим хвостовиком. Конструкция и размеры
带圆柱形凹槽的工具的切割套筒 设计和尺寸
ISO 3936-1993
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
带榫传动的减速套筒 外部和内部7/24锥度——尺寸
1993-10-21
DIN 15421-2
Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve
起重机；底块；带深沟球轴承和内套筒的B型绳轮的内套筒和隔套
1982-07-01
DIN 15422-2
Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
起重机；底块；带圆柱滚动轴承和内套筒的A型绳轮的内套筒和隔套
1982-07-01
MIL MIL-H-36887
HANDPIECE, DENTAL, CONTRA-ANGLE, WITH FRICTION GRIP CHUCK, ROUND SLEEVE (NO S/S DOCUMENT)
带摩擦夹紧卡盘、圆套筒的对角牙科手机（无S/S文件）
1972-08-02
DIN 230-1
Morse taper gauges; taper plug gauges for taper sockets with drift slot
莫尔斯锥度计；带漂移槽的锥形套筒用锥形塞规
1982-08-01
MIL MIL-L-45946A Notice 2-Inactivation
LINK, CARTRIDGE, METALLIC BELT, 20MM: M22 (SUPERSEDING MIL-L-45946)
金属带套筒连杆 20MM:M22（代替MIL-L-45946）
1996-06-05
DIN 4983
Tool holders with rectangular shank and cartridges for indexable inserts - Presentation of the designation
可转位刀片用带矩形柄和套筒的刀架.名称的表示
2004-07-01