SY/T 6540-2021
钻井液完井液损害油层室内评价方法
Lab testing method of driHing and completion fluid damaging oiI formation
2021-11-16
KS K ISO 10722(2018 Confirm)
지오신텍스 - 반복 하중에 의한 기계적 손상 평가를 위한 실내 시험 - 입상 재료에 의한 손상
土工合成材料在重复荷载下机械损伤评定的指数试验程序粒状材料引起的损伤
2008-05-01
SAE J2661_202303
Optical Imaging Evaluation of Impact Damage Resistance Testing on Exterior Finishes
外墙漆冲击损伤电阻测试的光学成像评估
2023-03-01
BS EN ISO 10722-2019
Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (laboratory test method)
土工合成材料 评估重复荷载下机械损伤的指数试验程序 颗粒材料造成的损坏（实验室试验方法）
2019-12-10
KS K ISO 10722
지오신세틱스 — 반복 하중에 의한 기계적 손상 평가를 위한 실내 시험 —입상 재료에 의한 손상(시험실 시험 방법)
土工合成材料.重复荷载下机械损伤评估的指数试验程序.颗粒材料引起的损伤（实验室试验方法）
2022-08-24
ISO 10722-2019
Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
土工合成材料.在重复荷载下评估机械损伤的指数试验程序.粒状材料引起的损伤（实验室试验方法）
2019-11-15
MIL MIL-STD-1761 Notice 2-Cancellation
FASTENER RECESS TEST, METHOD FOR DAMAGE TOLERANCE EVALUATION (NO S/S DOCUMENT)
紧固件凹陷试验 损伤容限评定方法（无S/S文件）
1995-12-05
JT/T 974-2015
公路工程土工合成材料 机械损伤试验方法
Test method for construction of samples to evaluate the physical damage of geosynthetics for highway engineering
2015-04-24
ASTM E3075-24
Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance
评估抗洪水损害性的浸水和干燥的标准试验方法
2024-05-01
GOST 32490-2013
Материалы геосинтетические. Метод оценки механического повреждения гранулированным материалом под повторяемой нагрузкой
土工合成材料重复载荷下机械损伤评估指标试验程序
2013-11-14
UNE-EN ISO 10722-2007
Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007)
土工合成材料.重复荷载下机械损伤评估的指数试验程序.粒状材料引起的损伤（ISO 10722-2007）
2007-09-19
GB/T 35065.2-2023
湿天然气流量测量 第2部分：流量计测试和评价方法
Wet natural gas flow measurement—Part 2:Test and evaluation method of flow meter
2023-12-28
SY/T 6491-2011
油层套管模拟井射孔试验与评价
Evaluation and perforating test for oil formation casing in model well
2011-07-28
SAE ARP4028
Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation
飞机/发动机燃油泵两相（冲击流）入口性能测试和评估
1994-09-01
ASTM E1530-25
Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
用保护热流量计技术评定热传导阻力的标准试验方法
2025-01-01
BS 3900-C9-1982
Methods of test for paints. Tests associated with paint film formation-Methods for evaluation of the compatibility of a product with a surface to be painted
涂料的试验方法 与漆膜形成相关的测试 产品与待涂漆表面相容性的评估方法
1982-11-30
ASTM E2525-22
Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
评估纳米颗粒材料对小鼠粒细胞-巨噬细胞集落形成影响的标准试验方法
2022-07-01
SH/T 0759-2005
内燃机油低温油泥和抗磨损性能评定法（程序VE法）
Test method for evaluation of automotive engine oils for inhibition of deposit formation and wear (Sequence-ⅤE method)
2005-04-11
SAE ARP8462
Evaluation of Fouling Propensity of Aviation Lubricants, Using the Mixed-Phase Flow Technique (High-Temperature Deposition Test)
用混合相流技术评价航空润滑油的结垢倾向（高温沉积试验）
2023-10-05
ASTM D6201-19a
Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
进气门沉积物形成用无铅火花点火发动机燃料测功机评定的标准试验方法
2019-12-01