GB/T 948-1988
开槽沉头不脱出螺钉
Slotted countersunk head screws with waisted shank
1988-06-24
GB/T 949-1988
开槽半沉头不脱出螺钉
Slotted raised countersunk head screws with waisted shank
1988-06-24
GB/T 837-1988
开槽盘头不脱出螺钉
Slotted pan head screws with waisted shank
1988-06-24
ADS AS2993
Screw - 'Phillips' 90° Countersunk Head
螺钉-“Phillips”90°沉头
1950-11-30
HB 8028-2002
尼龙90°沉头螺钉
90°countersunk head screws, in nylon
ADS AS2994
Screw - 'Phillips' Raised 90° Countersunk Head
螺钉-“Phillips”凸起90°沉头
1950-11-30
HB 8024-2002
TC16钛合金90°沉头螺钉
90°countersunk head screws in titanium alloy
HB 1-206-2002
十字槽90°沉头螺钉
90° countersunk head screw with cross recess
HB 8016-2002
TC16钛合金光杆公差带f9的90°沉头螺栓
90°countersunk head bolts, shank tolerance f9, in titanium alloy
HB 1-132-2002
光杆公差带f9十字槽90°沉头螺栓
90° countersunk head bolts with cross recess, shank tolerance f9
HB 1-134-2002
光杆公差带h8短螺纹十字槽90°沉头螺栓
90° countersunk head bolts with cross recess, shank tolerance f9
GOST 10464-1981
Шайбы стопорные с наружными зубьями под винты с потайной и полупотайной головкой с углом 90°. Конструкция и размеры
带有埋头螺钉的外齿的防震垫圈和90°角的凸头沉头 施工和尺寸
DIN 8374
Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws
用于间隙孔和沉头螺钉的沉孔的直柄小带麻花钻
2006-11-01
DIN 8375
Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
用于间隙孔和沉头螺钉沉孔的莫氏锥柄小带麻花钻
2006-11-01
MIL MIL-P-23469/6B Notice 3-Validation 3
Pin-Rivet, Grooved, Flat 90 Deg. Countersunk Head; Straight Shank, Six Locking Grooves and Multiple Locking Grooves, Aluminum Alloy, Corrosion-Resistant and Carbon Steels
平头90度沉头开槽销铆钉；直杆六个锁紧槽和多个锁紧槽铝合金耐腐蚀碳钢
2018-08-13
MIL MIL-P-23469/6B Notice 1-Validation
PIN-RIVET, GROOVED, FLAT 90 DEG. COUNTERSUNK HEAD; STRAIGHT SHANK, SIX LOCKING GROOVES AND MULTIPLE LOCKING GROOVES, ALUMINUM ALLOY, CORROSION-RESISTANT AND CARBON STEELS (SUPERSEDING MIL-P-23469/6A)
销-活套 带槽 90度平沉头；直柄、六个锁定槽和多个锁定槽、铝合金、耐腐蚀和碳钢（取代MIL-P-23469/6A）
2005-06-23
MIL MIL-P-23469/6B Amendment 1
PIN-RIVET, GROOVED, FLAT 90 DEG. COUNTERSUNK HEAD; STRAIGHT SHANK, SIX LOCKING GROOVES AND MULTIPLE LOCKING GROOVES, ALUMINUM ALLOY, CORROSION-RESISTANT AND CARBON STEELS (SUPERSEDING MIL-P-23469/6A)
销-活套 带槽 90度平沉头；直柄、六个锁定槽和多个锁定槽、铝合金、耐腐蚀和碳钢（取代MIL-P-23469/6A）
1992-12-22
MIL MIL-P-23469/6B
PIN-RIVET, GROOVED, FLAT 90 DEG. COUNTERSUNK HEAD; STRAIGHT SHANK, SIX LOCKING GROOVES AND MULTIPLE LOCKING GROOVES, ALUMINUM ALLOY, CORROSION-RESISTANT AND CARBON STEELS (SUPERSEDING MIL-P-23469/6A)
90度沉头平槽销铆钉；直柄、六个锁紧槽和多个锁紧槽、铝合金、耐蚀钢和碳钢（取代MIL-P-23469/6A）
1988-02-19
BS EN 3305-1997
Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
镀镉合金钢制短螺纹紧公差标准杆偏置十字槽100度沉头缩径螺钉 分类:1100兆帕（环境温度）/235摄氏度
1997-02-15
BS EN 3035-1997
Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
镀镉合金钢制短螺纹紧公差标准杆偏置十字槽100度沉头标准头螺钉 分类:1100兆帕（环境温度）/235摄氏度
1997-02-15