HB 1-502-2002
锥形螺栓用弧形垫圈
Arc washers for cone bolts
GB/T 850-1988
锥面垫圈
Washers with cone face
1988-02-06
UNE 22785-1985
BOLTING. WASHERS.
抽薹 洗衣机
1985-03-15
GB/T 9074.1-2018
螺栓或螺钉和平垫圈组合件
Bolt or screw and washer assemblies with plain washers
2018-12-28
GOST 13439-1968
Шайбы конические для станочных приспособлений. Конструкция
锥形垫圈用于机器保持装置 设计
GB/T 9074.32-2017
螺栓或螺钉和锥形弹性垫圈组合件
Bolt or screw and washer assemblies with conical spring washers
2017-12-29
DIN 48351-2
A-masts; bolts, nuts, washers
A型桅杆；螺栓、螺母、垫圈
1967-06-01
GOST 16069-1970
Шайбы для соединений трубопроводов по внутреннему конусу. Конструкция и размеры
内圆锥管连接垫圈 施工和尺寸
GB/T 9074.17-1988
六角头螺栓， 弹簧垫圈和平垫圈组合件
Hexagon head bolt，single coil spring lock washer and plain washer assemblies
1988-04-16
GB/T 5286-2001
螺栓、螺钉和螺母用平垫圈 总方案
Plain washers for bolts，screws and nuts--General plan
2001-12-17
GB/T 9074.13-1988
十字槽凹穴六角头螺栓，弹簧垫圈和平垫圈组合件
Cross recessed hexagon bolt with indentation，single coil lock washer and plain washer assemblies
1988-04-16
QJ 20040.4-2011
不锈钢螺钉垫圈组合件 第4部分:六角头螺栓、弹簧垫圈和平垫圈
Stainless steel screw and washer assemblies-Part 4:Hexagon head bolt,single coil spring lock washer and plain washer
2011-07-19
MIL MIL-B-70332/4 Notice 1-Cancellation
WASHER, SHOULDERED (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
带肩垫圈（螺栓组件、夹具）（无S/S文件）
1995-10-26
MIL MIL-B-70332/4
WASHER, SHOULDERED (BOLT ASSEMBLY, CLAMP) (NO S/S DOCUMENT)
带肩垫圈（螺栓组件、夹具）（无S/S文件）
1984-05-25
KS B ISO 7415(2018 Confirm)
고장력 구조용 볼트 체결을 위한 경화 및 템퍼링 처리 둥근 와셔
淬火和回火高强度结构螺栓用平垫圈
2008-12-11
BS EN 14399-5-2015
High-strength structural bolting assemblies for preloading-Plain washers
预加载用高强度结构螺栓组件
2015-02-28
KS B ISO 7415(2023 Confirm)
고장력 구조용 볼트 체결을 위한 경화 및 템퍼링 처리 둥근 와셔
硬化和回火的高强度结构螺栓用平垫圈
2008-12-11
GOST 28961-1991
Шайбы плоские для метрических болтов, винтов и гаек. Общий план
公制螺栓 螺钉和螺母的平垫圈 总计划
GOST 32484.5-2013
Болтокомплекты высокопрочные для предварительного натяжения конструкционные. Плоские шайбы
用于预加载的高强度结构螺栓组件 平垫圈
2013-11-14
GB/T 9074.11-1988
十字槽凹穴六角头螺栓和平垫圈组合件
Cross recessed hexagon bolt with indentation and plain washer assemblies
1988-04-16