JB/T 10853-2008
细木工芯板拼板机 精度
Lumber core composer--Acceptance conditions
2008-03-12
UNE 18128-1978
CONVEYOR BELTS COMPOSED OF RUBBER WITH CLOTH CORE. SAMPLING.
由带布芯的橡胶制成的传送带 取样
1978-07-15
UNE 18126-1978
CONVEYOR BELTS COMPOSED OF RUBBER WITH CLOTH CORE. ADHERENCE AMONG LAYERS BETWEEN CORE AND COVERS. MINIMUM VALUES.
由带布芯的橡胶制成的传送带 核心层和覆盖层之间的层间粘附 最小值
1978-06-15
UNE 18062-1978
CONVEYOR BELTS COMPOSED OF RUBBER WITH CLOTH CORE. TOTAL THICKNESS AND THICKNESS OF COVERS. TOLERANCES.
由带布芯的橡胶制成的传送带 总厚度和保护层厚度 公差
1978-06-15
UNE 18140-1978
CONVEYOR BELTS COMPOSED OF RUBBER WITH CLOTH CORE. TEAR PROPAGATION RESISTANCE OF THE CARCASS. METHOD OF TEST.
由带布芯的橡胶制成的传送带 胴体的抗撕裂繁殖能力 试验方法
1978-05-15
GOST 21293-1975
Шероховатость поверхностей нагреваемых стержневых ящиков. Параметры
表面处理加热芯盒 参数
GOST 25998-1983
Установки электрогидравлические для выбивки стержней. Типы, основные параметры и размеры
用于去除芯的电液装置 类型 基本参数和尺寸
GOST R 51776-2001
Трубы двойные колонковые для геолого-разведочного бурения. Типы и основные параметры
双管核心钻井用于勘探钻井 类型和主要参数
UNE 18142-1978
CONVEYOR BELTS COMPOSED OF RUBBER WITH CLOTH CORE, WITH LENGTH BETWEEN PULLEY CENTRES UP TO 300 M FOR LOOSE BULK MATERIALS. ADJUSTMENT OF TAKE-UP DEVICE.
由带布芯的橡胶制成的输送带 皮带轮中心之间的长度不超过300米 适用于松散的散装材料 张紧装置的调整
1978-02-15
GB/T 32825-2024
三相干式立体卷铁芯电力变压器技术参数和要求
Technical parameters and requirements for three-phase dry-type tridimensional wound core power transformers
2024-12-31
IEC PAS 63503-3-30-2023
Fibre optic interconnecting devices and passive components - Connector optical interfaces for multi-core fibre - Part 3-30: Connector parameters of standard outer diameter 4-core physically contacting fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules
纤维光学互连器件和无源元件.多芯光纤的连接器光学接口.第3-30部分:标准外径4芯物理接触光纤的连接器参数.直径为2.5mm和1.25mm的无角度圆柱形全氧化锆套圈
2023-11-08
IEC 63267-2-1-2024
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 μm core diameter fibres - Non-angled
纤维光学互连器件和无源元件.增强型宏观弯曲多模光纤的连接器光学接口.第2-1部分:物理接触的50μm芯径光纤的连接参数.无角度
2024-03-15
IEC 63267-2-2-2024
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-2: Connection parameters of physically contacting 50 μm core diameter fibres - Non-angled and angled for reference connector applications
纤维光学互连器件和无源元件.增强型宏观弯曲多模光纤的连接器光学接口.第2-2部分:物理接触的50μm芯径光纤的连接参数.参考连接器应用的无角度和有角度
2024-03-15
DIN EN IEC 61755-3-2-DRAFT
Draft Document - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-2: Connector parameters of dispersion unshifted single mode physically contacting fibres - Angled 2.5 mm and 1.25 mm diameter cylindrical full zirconia ferrules, core location variant
文件草案.光纤互连器件和无源元件.连接器光学接口.第3-2部分:色散非位移单模物理接触光纤的连接器参数.直径为2.5mm和1.25mm的倾斜圆柱形全氧化锆套管 芯位置变量
2020-02-01
DIN EN 61755-3-12-DRAFT
Draft Document - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-12: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - Angled cylindrical full zirconia ferrules, centred fibre core eccentricity (IEC 86B/4066/DC:2017)
文件草稿.纤维光学互连器件和无源元件.连接器光学接口.第3-12部分:非色散位移单模物理接触光纤连接用连接器参数.带角的圆柱形全氧化锆套管.中心纤维芯偏心率
2017-06-01
DIN EN 61755-3-11-DRAFT
Draft Document - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-11: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - Non-angled cylindrical full zirconia ferrules, centred fibre core eccentricity (IEC 86B/4065/DC:2017)
文件草稿.纤维光学互连器件和无源元件.连接器光学接口.第3-11部分:非色散位移单模物理接触光纤连接用连接器参数.无角圆柱形全氧化锆套管.中心纤维芯偏心装置
2017-06-01
IEC 63267-3-61-2025
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces for enhanced macrobend multimode fibres - Part 3-61: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for reference connection applications
光纤互连器件和无源元件 增强型宏弯多模光纤用光纤连接器光学接口 第3-61部分:物理接触50 μ m纤芯直径光纤的连接器参数 参考连接应用用无角度2.5 mm和1.25 mm直径圆柱形全氧化锆套圈
2025-06-25
IEC 63267-3-81-2025
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibre - Part 3-81: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled polyphenylene sulphide rectangular ferrules with a single row of 12, 8, 4, or 2 fibres for reference connector applications
光纤互连器件和无源元件 增强型宏弯曲多模光纤的连接器光学接口 第3-81部分:物理接触50 μ m纤芯直径光纤的连接器参数 参考连接器应用用单排12、8、4或2根光纤的无角度聚苯硫醚矩形套圈
2025-06-25