作废 YS/T 455.5-2003
铝箔试验方法 第5部分 铝箔的直流电组试验方法 铝箔试验方法 第5部分 铝箔的直流电组试验方法 Test method for aluminium foil Part 5: Test method for direct-current resistance
发布日期:2003-12-29
实施日期:2004-05-01
分类信息
研制信息

归口单位: 全国有色金属标准化技术委员会

起草单位: 华北铝业有限公司

起草人: 梁明霞、 孔祥鹏、 王淑芬、 程杰、 谢馨刚、 张深阳、 高景忠

标准简介
相似标准/计划/法规
GB/T 22638.6-2016
铝箔试验方法 第6部分:直流电阻的测定
Test methods for aluminium and aluminium alloy foils—Part 6: Determination of direct current resistance
2016-12-30
GB/T 22638.5-2016
铝箔试验方法 第5部分:润湿性的检测
Test methods for aluminium and aluminium alloy foils—Part 5:Determination of wettability
2016-12-30
GB/T 22638.3-2016
铝箔试验方法 第3部分:粘附性的检测
Test methods for aluminium and aluminium alloy foils—Part 3:Determination of stickiness
2016-12-30
GB/T 22638.2-2016
铝箔试验方法 第2部分:针孔的检测
Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole
2016-12-13
GB/T 22638.1-2016
铝箔试验方法 第1部分: 厚度的测定
Test methods for aluminium and aluminium alloy foils—Part 1: Determination of thickness
2016-12-13
GB/T 22638.9-2016
铝箔试验方法 第9部分:亲水性的检测
Test methods for aluminium and aluminium alloy foils—Part 9: Determination of hydrophilic property
2016-12-30
GB/T 22638.7-2016
铝箔试验方法 第7部分:热封强度的测定
Test methods for aluminium and aluminium alloy foils-Part 7:Determination of heat seal strength
2016-12-30
GB/T 22638.4-2016
铝箔试验方法 第4部分:表面润湿张力的测定
Test methods for aluminium and aluminium alloy foils—Part 4:Determination of surface wetting tension
2016-12-13
UNE 20543-13-1983
FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
直流用聚丙烯膜介质金属箔固定电容器 试验方法的选择和一般要求
1983-02-15
UNE 20543-12-1982
FIXED POLYCARBONATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
直流用聚碳酸酯薄膜介质金属箔固定电容器 试验方法的选择和一般要求
1982-10-15
UNE 20543-11-1982
FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
直流用聚乙烯对苯二甲酸酯膜介质金属箔固定电容器 试验方法的选择和一般要求
1982-12-15
JIS H 8680-2-1998
Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Eddy current method
铝及铝合金阳极氧化膜厚度试验方法第2部分:涡流法
1998-01-01
GB/T 22638.10-2016
铝箔试验方法 第10部分:涂层表面密度的测定
Test methods for aluminium and aluminium alloy foils—Part 10:Determination of mass per unit area (surface density) of coatings
2016-12-30
GB/T 12967.5-2022
铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分:抗破裂性的测定
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking
2022-03-09
UNE-EN 2004-5-1996
AEROSPACE SERIES. TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOYS PRODUCTOS. PART 5: DETERMINATION OF CLADDING THICKNESS AND COPPER DIFFUSION OF CLAD SEMI-FINISHED PRODUCTS.
航空航天系列 铝及铝合金产品的试验方法 第5部分:覆层厚度和覆层半成品铜扩散的测定
1996-02-06
DIN EN 2004-5
Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993
航空航天系列;铝和铝合金产品的试验方法;第5部分:覆层厚度和覆层半成品铜扩散的测定;德文版EN 2004-5:1993
1993-09-01
IEC 60747-5-11-2019
Semiconductor devices - Part 5-11: Optoelectronic devices - Light emitting diodes - Test method of radiative and nonradiative currents of light emitting diodes
半导体器件第5-11部分:光电子器件发光二极管发光二极管辐射电流和非辐射电流的试验方法
2019-12-11
DIN EN 1793-5
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions (includes Corrigendum :2018)
道路交通噪声降低装置.测定声学性能的试验方法.第5部分:固有特性.直接声场条件下声反射的现场值(包括勘误:2018)
2018-12-01
DIN EN 16272-5-DRAFT
Draft Document - Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions; German and English version prEN 16272-5:2022
文件草案——铁路应用——基础设施——作用于空气声传播的隔音屏障和相关装置——声学性能测定的试验方法——第5部分:固有特性——直接声场条件下的吸声;德语和英语版本
2022-03-01
DIN 51627-5-DRAFT
Draft Document - Automotive Fuels - Test methods - Part 5: Direct determination of trace elements in diesel fuels and blends of Diesel fuel with FAME contents of up to 20 % (V/V) by inductively coupled plasma optical emission spectroscopy (ICP OES)
文件草案.汽车燃料.试验方法.第5部分:用电感耦合等离子体光学发射光谱法(ICP OES)直接测定FAME含量高达20%(V/V)的柴油燃料和柴油燃料混合物中的微量元素
2009-03-01
试验方法直流电

最后更新时间 2025-08-30