MIL MIL-N-3336A Amendment 2
NUT, SHEET SPRING, INSTRUMENT MOUNTING (SUPERSEDING MIL-N-3336)
NUT SHEET SPRING 仪表安装（取代MIL-N-3336）
1973-02-05
MIL MIL-P-48357A Notice 1-Validation
PROPELLANT, DOUBLE-BASE SHEET, M36 (SUPERSEDING MIL-P-48357)
PROPELLANT DOUBLE-BASE SHEET M36（SUPEREDING MIL-P-48357）
1988-06-13
MIL MIL-F-13526B Notice 1-Validation
FIBER, RED (SHEET), FOR SMALL ARMS BUFFER DISKS (NO S/S DOCUMENT) (SUPERSEDING MIL-F-13526A)
纤维 红色（SHEET） 小型缓冲盘（无S/S文件）（取代MIL-F-13526A）
1989-12-06
SAE AMS4279C
Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet), Solution Heat Treated, High Formability
铝合金 Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn（2024-T4平板）溶液热处理 成型性高
2022-08-05
SAE AMS4100G
Aluminum Alloy, Alclad, Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761), Solution and Precipitation Heat Treated
铝合金 Alclad Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr（Alclad 7475-T761） 溶液和沉淀热处理
2024-01-16
SAE AMS4298B
Aluminum Alloy, Alclad Sheet, 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3), Solution Heat Treated and Cold Worked
铝合金 Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn-0.60Zn（Alclad 2056-T3）热处理和冷加工溶液
2024-03-12
DID DI-SDMP-81263
FEDERAL SPECIFICATION SHEET (SLASH SHEET)
联邦规格表（斜线表）
1992-04-28
ISO 6916-1-1995/Cor 1-2002
Sheeting
床单
2002-05-30
SAE J1392_201703
Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet
钢 高强度 热轧板和带 冷轧板和涂层板
2017-03-23
JIS H 4301-2009
Lead sheets and plates and hard lead sheets and plates
铅板和铅板以及硬铅板和铅板
2009-01-01
KS D 6710
마그네슘 합금 판, 대 및 코일판
镁合金片材 板材 带材和片材卷绕
2016-12-19
DIN 40604-1
Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes
硫化纤维；面板（片材）、薄板、条带、胶带
1965-07-01
KS D 5512(2020 Confirm)
납판 및 경납판
铅片和板和硬铅片板材
2010-06-17
KS D 6710(2021 Confirm)
마그네슘 합금 판, 대 및 코일판
镁合金板材、板材、带材和卷材
2016-12-19
SAE AMS4932E
Titanium Alloy Sheet, 6Al - 4V, Driver Sheet
钛合金板 6al - 4v 驱动板
2024-08-23
GOST 9639-1971
Листы из непластифицированного поливинилхлорида (винипласт листовой). Технические условия
来自未增塑的聚氯乙烯片材（片状塑料） 规格
BS 5815-1-2005
Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector-Specification for sheeting, sheets and pillowslips
适用于公共部门的床单、床单、枕套、毛巾、餐巾、床单和欧式被子二次被套
2005-06-20
ASME MH1.5M-1993
Slip Sheets
滑板
1993-01-01
FED QQ-L-201F Notice 1-Validation 1
LEAD SHEET
铅板
2020-12-22