GB/T 3983-2008
无杆锚
Stockless anchor
2008-03-17
UNE 27183-3-1951
STOCKLESS ANCHORS. TYPE A. ANCHOR RINGS.
无杆锚 A型:锚环
1951-10-15
UNE 27183-2-1951
STOCKLESS ANCHORS. TYPE A. ANCHOR WEDGES.
无杆锚 A型:锚楔
1951-10-15
UNE 27184-1956
STOCKLESS ANCHORS. TYPE B.
无杆锚 B型
1956-12-15
UNE 27183-1-1951
STOCKLESS ANCHORS. TYPE A. ASSEMBLY.
无杆锚 A型:装配
1951-10-15
GB/T 22795-2008
混凝土用膨胀型锚栓 型式与尺寸
Expansion anchors for use in concrete - Type and dimension
2008-12-31
KS V ISO 4050(2020 Confirm)
내수면 선박－‘라인’형과 ‘홀’형 스톡리스 앵커
造船－内河船舶－“莱茵河”和霍尔无杆锚具
2005-03-14
QJ 1159.8-1987
光滑极限量规型式尺寸 球端杆规(D>120～500)
1987-03-31
GB/T 2350-2020
流体传动系统及元件 活塞杆螺纹型式和尺寸系列
Fluid power systems and components—Cylinder piston rod thread types and dimensions
2020-11-19
MT/T 909-2002
无链牵引链轨 第2部分:无链牵引轨座型式和尺寸
Rack for chainless haulage system Part2:type and size of rack support for chainless haulage system
2002-04-08
MT/T 576-1996
液压支架立柱、千斤顶活塞和活塞杆用带支承环的密封沟槽型式、尺寸和公差
1996-08-14
ISO 12101-2025
Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Classification system and qualification procedures for type testing of stem seals for valves
工业阀门 无组织排放物的测量试验和鉴定程序 阀门阀杆密封型式试验的分类系统和鉴定程序
2025-06-13
MIL MIL-T-52907
TRACTOR, FULL TRACKED, LOW SPEED, DED, HEAVY DRAWBAR PULL, SIZE T-11 COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) (NO S/S DOCUMENT)
全履带式低速DED重型牵引杆牵引拖拉机 尺寸为T-11商用建筑设备（CCE）（无S/S文件）
1976-08-23
BS +A 307-1994
Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓 标准花键头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
1994-08-15
BS +A 309-1994
Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
大六角头螺栓 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
1994-08-15
BS A 304-1994
Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓 标准双六角头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
1994-08-15
ISO 9254-1993
Aerospace — Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓 标准花键头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸
1993-12-23
BS A 331-1998
Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa. Dimensions
有涂层或无涂层、金属材料制、标准或中径杆、长MJ螺纹、缩径双六角头螺栓 强度等级小于或等于1275 MPa 尺寸
1998-09-15
ISO 9256-1993
Aerospace — Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；大六角头螺栓 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸
1993-12-23
ISO 3203-1993
Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓 标准双六角头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸
1993-12-23