HB 4-3-2002
扩口式管接头的螺纹部分
Thread end of flared tube fitting
SAE AS8575
FITTING, TEE, MALE FLARELESS TO EXTERNAL SWAGE ON RUN, FEMALE FLARELESS ON BRANCH, HYDRAULIC
三通管接头 外螺纹无扩口至外螺纹 支管内螺纹无扩口 液压
2021-06-01
MIL MS51891A
PLUG, TUBE FITTING, THREADED, FLARELESS TYPE, HYDRAULIC
液压无扩口式螺纹卡套管接头插头
2018-07-25
SAE AS6488
FITTING, TEE, BULKHEAD, MALE FLARELESS TO EXTERNAL SWAGE ON RUN, EXTERNAL SWAGE ON BRANCH, HYDRAULIC
三通管接头 隔板 外螺纹无扩口至外螺纹 分支外螺纹 液压
2021-03-08
MIL MS51506F
Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Elbow, Pipe to Tube, 90 Degree, Female Pipe End, 37 Degree Flared
37度扩口和无扩口液压管接头 弯头 管对管 90度 内螺纹管端 37度扩口
2020-07-21
SAE AS5767B
FITTING ASSEMBLY, TEE, FEMALE FLARELESS ON RUN, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
内螺纹无扩口三通管接头组件 轴向锻造 液压 5080 PSI
2020-04-29
DIN 3866 Corrigendum 1
Refrigeration; threaded stem; 90° flared flanges for solderless compression couplings rated for PN 40; Corrigendum 1
制冷；螺纹杆；90°扩口法兰 用于额定PN 40的无焊压缩管接头；更正1
2019-10-01
MIL MS51500G
FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, PIPE TO TUBE, MALE PIPE END, 37 DEGREE FLARED (SUPERSEDING MS51500E)
37度扩口和无扩口液压管配件 钢制；直管接头 管对管 外螺纹管端 37度扩口（取代MS51500E）
2020-07-21
MIL MS27632B Notice 1-Validation 1
Nipple Sub Assembly, Flareless, Straight-with Swivel Nut
带旋转螺母的直型无扩口螺纹接头组件
2018-09-13
MIL MS27386C Notice 1-Validation 1
Nipple Subassembly, Flareless, Straight - with Swivel Nut
带旋转螺母的直型无扩口螺纹接头组件
2018-07-11
MIL MS27386B Notice 1-Validation
Nipple Subassembly, Flareless, Straight - with Swivel Nut
带旋转螺母的直型无扩口螺纹接头组件
2012-12-12
MIL MS27635A Notice 1-Reactivation
NIPPLE, FLARELESS, TUBE, TO HOSE-SWIVEL NUT (SUPERSEDING MS27635) (S/S BY MS27635B)
至软管-螺纹螺母的无扩口管接头（取代MS27635）（由MS27635B代替S/S）
2000-07-10
MIL MS27632 Notice 1-Cancellation
NIPPLE SUB ASSEMBLY, FLARELESS, STRAIGHT - WITH SWIVEL NUT (S/S BY MS27632A)
带旋转螺母的直形无扩口螺纹接头分总成（MS27632A制造）
1996-03-14
MIL MS27632 Notice 2-Reactivation
NIPPLE SUB ASSEMBLY, FLARELESS, STRAIGHT - WITH SWIVEL NUT (S/S BY MS27632A)
带旋转螺母的直形无扩口螺纹接头分总成（MS27632A制造）
1999-02-18
MIL MS28761C
FITTING END, STRAIGHT, ATTACHABLE, HYDRAULIC, HIGH PRESSURE HOSE 3,000 PSI, FLARELESS TUBE(SUPERSEDING MS28761B)
3000 PSI无扩口管（取代MS28761B）的可连接直液压高压软管接头端
2007-04-26
EN 4836-2018
Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting - Reducer - Flareless End - Inch Series - Extra Fine Thread Pitch
航空航天系列.35000kpa（5080psi）以下24°锥管接头环锁紧接头.异径管.无扩口端.英制系列.特细螺纹节距
2018-08-01
MIL MS33515J
FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS (SUPERSEDING MS33515H) (S/S BY SAE-AS33515)
舱壁无扩口管接头的标准尺寸装配端（代替MS33515H）（由SAE-AS33515提供）
1973-01-23
MIL MS39156
ADAPTER, STRAIGHT, TUBE TO HOSE - 37 DEG. FLARE, FEMALE, REUSABLE (NO S/S DOCUMENT)
可重复使用的37度扩口内螺纹直管至软管接头（无S/S文件）
1962-03-09
DIN 8912
Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems
制冷系统中与PN 40扩口法兰无焊压缩管接头一起使用的连接螺母和螺塞
1990-06-01
DIN 8914
90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems
制冷系统中与PN 40扩口法兰无焊压缩管接头一起使用的90°锥形密封圈和盖
1990-06-01