TB/T 1632.4-2014
钢轨焊接 第4部分：气压焊接
Welding of rails Part 4: Gas pressure welding
2014-10-30
GB/T 33488.4-2017
化工用塑料焊接制承压设备检验方法 第4部分：超声检测
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination
2017-02-28
ISO 5175-3-2025
Gas welding equipment — Safety devices — Part 3: Decomposition blockers for low-pressure acetylene
气焊设备 安全装置 第3部分:低压乙炔分解阻断器
2025-04-25
UNE-EN 10217-4-2003
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties.
承压焊接钢管.交货技术条件.第4部分:具有规定低温性能的电焊非合金钢管
2003-02-14
BS 09/30207511 DC
BS EN 10217-4. Welded steel tubes for pressure purposes. Technical delivery conditions. Part 4. Electric welded non-alloy steel tubes with specified low temperature properties
英国标准EN 10217-4 压力用焊接钢管 技术交付条件 第四部分 具有规定低温性能的电焊非合金钢管
2009-10-13
SN/T 4367.4-2017
进出口钢管检验规程 第4部分：石油天然气道焊管
Rules for the inspection of steel pipe for import and export-Part 4:Welded pipe for transport oil and gas
2017-07-21
ISO 18172-1-2007
Gas cylinders — Refillable welded stainless steel cylinders — Part 1: Test pressure 6 MPa and below
气瓶——可再填充焊接不锈钢气缸Spart 1:试验压力6 MPa及以下
2007-02-21
ISO 9330-4-2000
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
压力用焊接钢管——技术交付条件第4部分:具有规定高温性能的埋弧焊非合金和合金钢管
2000-07-13
ISO 18172-2-2007
Gas cylinders — Refillable welded stainless steel cylinders — Part 2: Test pressure greater than 6 MPa
气瓶——可再填充焊接不锈钢气缸Spart 2:试验压力大于6 MPa
2007-02-21
ISO 22073-1-2024
Gas welding equipment — Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar)
气焊设备 第1部分:6兆帕（60巴）以下气体分配管道用带流量计量装置的管路压力调节器和管路压力调节器
2024-11-13
DIN EN 12573-4
Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints; English version of DIN EN 12573-4
焊接静态无压热塑性储罐.第4部分:法兰接头的设计和计算；德文版EN 12573-4:2000
2000-12-01
KS B ISO 15616-3(2018 Confirm)
고품질 용접 및 절단용 CO2 레이저 가공기의 인수시험－제3부：가스 유량 및 가스 압력 측정기구의 교정
高质量焊接和切割用CO2激光束机验收试验第3部分:气体流量和压力测量仪器的校准
2008-06-27
KS B ISO 15616-3(2023 Confirm)
고품질 용접 및 절단용 CO2 레이저 가공기의 인수시험－제3부：가스 유량 및 가스 압력 측정기구의 교정
高质量焊接和切割用CO2激光机的验收试验第3部分:气体流量和压力测量仪器的校准
2008-06-27
ISO 15616-3-2003
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure
高质量焊接和切割用CO2激光束机的验收试验第3部分:气体流量和压力测量仪器的校准
2003-03-05
DIN 16831-4
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 4: Dimensions of injection-moulded reducers for socket welding
聚丁烯压力管用管件和接头组件.PB 125型.第4部分:承插焊接用注射成型异径管的尺寸
2003-05-01
ISO 11119-4-2016
Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
气瓶.可重复充装的复合气瓶.设计 结构和试验.第4部分:带均载焊接金属内衬的150L以下全缠绕纤维增强复合气瓶
2016-02-12
UNE-EN ISO 15616-3-2003
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
高质量焊接和切割用CO2激光束机的验收试验第3部分:气体流量和压力测量仪器的校准
2003-09-19
ISO 21172-1-2015
Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres
气瓶 - 用于运输气体高达3000升的焊接钢压力鼓 - 设计和施工 - 第1部分:容量高达1 000升
2015-03-30
SY/T 6423.4-2013
石油天然气工业 钢管无损检测方法 第4部分:无缝和焊接钢管分层缺欠的自动超声检测
Petroleum and natural gas industries -- Non-destructive testing (NDT) methods of steel tubes -- Part 4:Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
2013-11-28
DIN EN ISO 15616-3
Acceptance tests for CO<(Index)2>-laser beam machines for high-quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
CO的验收试验.高质量焊接和切割用激光束机.第3部分:气体流量和压力测量仪器的校准（ISO 15616-3-2003）；德文版EN ISO 15616-3:2003
2003-05-01