SC/T 9011.1-2006
冻结装置试验方法 第1部分：总则
Test Method for the freezing plant Part 1: General rules
2006-07-10
GB/T 9966.2-2020
天然石材试验方法 第2部分：干燥、水饱和、冻融循环后弯曲强度试验
Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength
2020-03-06
NB/T 31101.2-2016
风力发电机组 板式冷却器 第2部分:试验方法
Plate cooler for wind turbine generator Part 2:Test method
2016-08-16
UNE 103807-2-2008
Plate loading test of soils by means of dynamic plate. Part 2: Rigid plate, diameter 2r=300 mm, Method 2
采用动态平板法对土壤进行平板荷载试验 第2部分:刚性板 直径2r=300 mm 方法2
2008-07-30
JIS K 5600-2-3-2014
Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 3: Viscosity (Corn and plate methods)
涂料试验方法第2部分:涂料的特性和稳定性第3节:粘度（玉米法和平板法）
2014-01-01
GB/T 27797.2-2011
纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding
2011-12-30
ISO 1268-2-2001
Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding
纤维增强塑料——试板Spart 2的生产方法:接触成型和喷射成型
2001-03-29
ASD-STAN prEN 4050-2
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
航空航天系列.金属材料的试验方法.棒材、板材、锻坯和锻件的超声波检验.第2部分:试验性能
1996-01-31
DIN EN 4050-2
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test; German and English version EN 4050-2:2012
航空航天系列.金属材料的试验方法.棒材、板材、锻坯和锻件的超声波检验.第2部分:试验性能；德语和英语版本EN 4050-2:2012
2012-12-01
UNE-EN 50266-2-1-2001
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables -- Part 2-1: Procedures - Category A F/R.
着火条件下电缆的通用试验方法.垂直安装的成束电线或电缆的垂直火焰蔓延试验.第2-1部分:程序.A类F/R
2001-07-20
GB/T 45234.302-2025
太阳能热发电站 第3-2部分：系统与部件 大尺寸抛物面槽式集热器通用要求与测试方法
Solar thermal electric plants—Part 3-2: Systems and components—General requirements and test methods for large-size parabolic-trough collectors
2025-01-24
IEC 62862-3-2-2018
Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors
太阳能热电厂.第3-2部分:系统和部件.大型抛物线槽集热器的一般要求和试验方法
2018-07-10
IEC 62862-5-2-2022
Solar thermal electric plants - Part 5-2: Systems and components - General requirements and test methods for large-size linear Fresnel collectors
太阳能热电厂第5-2部分:系统和部件大型线性菲涅耳收集器的一般要求和试验方法
2022-05-10
NB/T 20133.2-2012
压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法
Specifications for protective coatings used in pressurized water reactor nuclear power plants-Part 2:Standard test method for evaluating coatings at simulated design basis accident (DBA) conditions
2012-01-06
DIN EN IEC 62862-3-2
Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors (IEC 62862-3-2:2018); German version EN IEC 62862-3-2:2018
太阳能热电厂.第3-2部分:系统和部件.大型抛物面槽集热器的一般要求和试验方法（IEC 62862-3-2-2018）；德国版本EN IEC 62862-3-2:2018
2019-06-01