GB/T 4309-2009
粉末冶金材料分类和牌号表示方法
Classification and designation for powder metallurgy materials
2009-03-19
GB/T 12767-1991
粉末冶金制品 表面粗糙度 参数及其数值
Powder metallurgy products--Surface roughness--Parameters and their values
1991-03-22
ASM Mo-14
POWDER METALLURGY MOLYBDENUM - 99.5% Minimum Molybdenum Wrought Products
粉末冶金钼——99.5%最低钼锻制品
1988-08-01
SAE AMS7510C
Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product
磁铁 稀土/钴 永久粉末冶金产品
2017-05-31
SAE AMS4996B
Billets and Preforms, 6al 4v, Premium Quality, Powder-Metallurgy Product
坯料和预制品 6al 4v 高品质 粉末冶金产品
2002-07-23
ASTM B925-15(2022)
Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
粉末冶金（PM）试样的生产和制备的标准实施规程
2022-03-01
ASTM B946-23
Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
粉末冶金（PM）产品表面粗糙度的标准试验方法
2023-02-01
JB/T 2798-1999
铁基粉末冶金烧结制品金相标准
Metallography standard specifications for powder metallurgy iron-based sintering products
1999-08-06
GOST R 59094-2020
Требования к оформлению документов на технологические процессы изготовления изделий методом порошковой металлургии
粉末冶金法零件生产工艺流程文件整理要求
SAE AMS4266B
Aluminum Alloy, Sheet, 6.5Fe - 1.3Si - 0.60V (8022-H112), Powder Metallurgy Product, Strain Hardened
铝合金板6.5Fe - 1.3Si - 0.60V（8022-H112）粉末冶金产品 硬化品
2017-05-25
SAE AMS4308B
Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened
铝合金板8.6Fe - 1.8Si - 1.3V（8009-H112）粉末冶金产品 硬化品
2017-04-04
SAE AMS4309B
Aluminum Allloy Extrusions 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened
铝合金挤压件8.6Fe-1.8Si-1.3V（8009-H112）粉末冶金产品 应变硬化
2017-04-04
SAE AMS4995B
Billets and Preforms, 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality, Powder-Metallurgy Product
坯料和预制件 5Al 2Sn 2Zr 4Cr 4Mo 0.10O？优质粉末冶金产品
1998-02-01
ASTM B962-23
Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
用阿基米德原理测定压实或烧结粉末冶金（PM）产品密度的标准试验方法
2023-09-01
JB/T 8063.3-2011
粉末冶金材料与制品化学分析方法 第3部分:铁基材料与制品中钼的测定(硫氰酸盐光度法)
Methods for chemicalanalysis of powder metallurgy materials and products. Part 3：The thiocyanate photometric method for the determination of molybdenum in iron-based materials and products
2011-12-20
SAE AMS6557A
Steel, Bars, Wire, and Forgings, 9V - 5.25Cr - 1.3Mo (1.80 - 1.95C), Powder Metallurgy Product, Hot Isostatically Pressed
钢 棒 线和锻件 9V - 5.25Cr - 1.3Mo（1.80 - 1.95C） 粉末冶金产品 热等静压
2018-06-03
SAE AMS6559A
Steel, Bars, Wire, and Forgings, 9.75V - 5.25Cr - 1.3Mo (2.40 - 2.55C), Powder Metallurgy Product, Hot Isostatically Pressed
钢 棒材 线材和锻件 9.75V - 5.25Cr - 1.3Mo（2.40-2.55C） 粉末冶金产品 热等静压
2018-06-03
JB/T 8063.1-2011
粉末冶金材料与制品化学分析方法 第1部分：铁基材料与制品中碳的测定（气体容量法）
Methods for chemical analysis of powder metallurgy materials and products — Part 1：The gas volumetric method for the determination of carbon in iron-based materials and products
2011-12-20
SAE AMS6556A
Steel, Bars, Wire, and Forgings, 8V - 4Cr - 4W - 3Mo (2.45 - 2.55C), Powder Metallurgy Product, Hot Isostatically Pressed
钢 棒材 线材和锻件 8V - 4Cr - 4W - 3Mo（2.45 - 2.55C） 粉末冶金产品 热等静压
2018-06-03
SAE AMS6558A
Steel, Bars, Wire, and Forgings, 10.5Mo - 6W - 3.75Cr - 2V (1.25 - 1.40C), Powder Metallurgy Product, Hot Isostatically Pressed
钢 棒材 线材和锻件 10.5Mo - 6W - 3.75Cr - 2V（1.25 - 1.40C） 粉末冶金产品 热等静压
2018-06-03