KS F 4416
콘크리트 적층 블록
挡土墙和护岸用混凝土砌块的标准规范
2019-12-31
KS F 4416
콘크리트 적층 블록
挡土墙和护岸用混凝土砌块的标准规范
2024-12-31
KS F 4019
철근 콘크리트 조립 흙막이
钢筋混凝土组合挡土墙标准规范
2022-07-18
ASTM C1372-24
Standard Specification for Dry-Cast Segmental Retaining Wall Units
干浇注段挡土墙单元标准规范
2024-12-01
ASTM C1776/C1776M-17(2022)
Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
湿铸预制模块式挡土墙单元的标准规范
2022-05-01
SL 279-2016
水工隧洞设计规范
Specification for design of hydraulic tunnel
2016-04-26
MIL MS27238B Notice 2-Validation 2
Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
电线 螺母固定 专为转换接头设计 软管到卡套管 可重复使用 液压 燃油和机油管路
2018-07-03
MIL MS27238B Notice 1-Validation
Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines
电线 螺母固定 专为转换接头设计 软管到卡套管 可重复使用 液压 燃油和机油管路
2013-02-14
SL/T 744-2016
水工建筑物荷载设计规范
Specification for load design of hydraulic structures
2016-11-25
DL 5077-1997
水工建筑物荷载设计规范
Specifications for load design of hydraulic structures
1997-10-22
MIL MS27238B
WIRE, NUT RETAINING, DESIGNED FOR ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES(SUPERSEDING MS27238A)
电线 螺母固定 专为适配器、软管到管、可重复使用的液压、燃油和机油管路设计（取代MS27238A）
2007-05-14
BS 4L 56-1986
Specification for tube of aluminium-2¼% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
铝-2%镁合金管规范（回火代号-O）（无缝:液压试验）（壁厚不超过12 mm）
1986-02-28
CECS 144-2002
水力控制阀应用设计规程(附条文说明)
Specification for applied design of hydraulic control valve
SL/T 792-2020
水工建筑物地基处理设计规范
Design specification for ground treatment of hydraulic structures
2020-05-15
ASTM E1925-18
Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
刚性壁可移动结构的工程和设计标准规范
2018-10-01
DL/T 5269-2012
水电水利工程砾石土心墙堆石坝施工规范(附条文说明)
Specification on rockfill dam built with gravel and soil core wall in hydroelectric and hydraulic engineering
2012-01-04
NB/T 35010-2013
水力发电厂继电保护设计规范(附条文说明)
Specification for design of relaying protection in hydraulic power plants
2013-06-08
T/CCPITBSC 077-2025
水利工程施工组织设计编制规范
Specifications for the preparation of construction organization design for hydraulic engineering
2025-07-29
BS 07/30129896 DC
BS EN 1998-5. National Annex to Eurocode 8. Design of structures resistance. Part 5. Foundations, retaining walls and geotechnical aspects
英国标准1998-5 欧洲法规8的国家附件 结构阻力设计 第五部分 基础、挡土墙和岩土工程方面
2007-10-25
MIL MS27238A Amendment 1
WIRE, NUT RETAINING, DESIGNED FOR ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES (SUPERSEDING MS27238) (S/S BY MS27238B)
用于适配器、软管到管、可重复使用、液压、燃油和机油管路的螺母固定式电线（取代MS27238）（由MS27238B替代）
2001-04-06