TSG Q7008-2007 升降机型式试验细则

Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type)
起重机、单轨和起重机（带吊桥或小车或悬挂式起重机）的施工规则

2016-06-30

SUSPENSION GEARS FOR WIRE ROPES FOR MINE SHAFT HOISTING. PART 1. CONSTRUCTION RULES AND TESTS.
矿井提升用钢丝绳悬挂装置 第一部分 施工规则和测试

1990-10-19

煤矿重要用途在用钢丝绳性能测定方法及判定规则
Testing method and decision rule of steel wire ropes for important purposes for coal mine hoisting

2019-11-28

Rulings to cranes, hoists and winches Standards, Ruling 1: Load testing (commissioning tests) of bridge, gantry, portal (including container cranes) and jib cranes (Ruling to AS 1418.3-1997)
裁决1:桥梁、龙门起重机、门式起重机（包括集装箱起重机）和悬臂起重机的荷载试验（调试试验）（根据AS 1418.3-1997裁决）

2013-03-14

客运拖牵索道型式试验细则
Type Test Rule of Passengers Surface Lifts

2005-09-16

客运索道部件型式试验细则
Type Test Rule of Passenger Ropeway Parts

2005-11-08

瘦肉型猪杂交组合试验技术规程
Technical rules for cross-combination testing of lean-type pigs

Restrained joint systems for ductile iron pipelines. Design rules and type testing
球墨铸铁管道的约束接头系统 设计规则和型式试验

2018-01-11

球墨铸铁管线用自锚接口系统 设计规定和型式试验
Restrained joint systems for ductile iron pipelines—Design rules and type testing

2018-05-14

Restrained joint systems for ductile iron pipelines — Design rules and type testing
用于球墨铸铁管道的限制性接头系统 - 设计规则和型式试验

2018-01-03

活塞式输油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Plunger type fuel feed pump reliability test - Assessment methods,bench test methods,failure type classification and judgment rules

2015-10-10

喷油器总成可靠性考核 评定方法、试验方法、故障分类及判定规则
Nozzle assemblies reliability test — Assessment methods, test methods, failure type classification and judgment rules

2013-04-25

合成式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Integral drive pump reliability test — Assessment methods, bench test methods, failure type classification and judgment rules

2013-04-25

分列式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Fuel injection pump reliability test — Assessment methods, bench test methods, failure type classification and judgment rules

2013-04-25

Rules for steam turbine thermal acceptance tests - Part 0: Wide range of accuracy for various types and sizes of turbines
汽轮机热验收试验规则第0部分:各种类型和尺寸汽轮机的大范围精度

2022-05-30

柴油机喷油泵供油角度自动提前器总成可靠性 评定方法、试验方法、故障分类及判定规则
Automatic timing-advance of diesel fuel injection pump reliability test - Assessment methods,bench test methods,failure type classification and judgment rules

2015-10-10

Система стандартов безопасности труда. Средства индивидуальной защиты органов дыхания. Аппараты изолирующие автономные со сжатым воздухом. Технические требования. Методы испытаний. Маркировка. Правила отбора образцов
职业安全标准体系 闭路呼吸器压缩空气型 要求 测试 标记 模拟选择规则

2015-06-18

汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines

2008-07-02

Commission Delegated Regulation (EU) 2022/545 of 26 January 2022 supplementing Regulation (EU) 2019/2144 of the European Parliament and of the Council by laying down detailed rules concerning the specific test procedures and technical requirements for the type-approval of motor vehicles with regard to their event data recorder and for the type-approval of those systems as separate technical units and amending Annex II to that Regulation (Text wit
2022年1月26日的委员会授权法规（EU）2022/545补充了欧洲议会和理事会的法规（EU）2019/2144 规定了关于机动车事件数据记录器型式认证的具体测试程序和技术要求以及作为单独技术系统的这些系统的型式认证的详细规则并修改该法规附件二（文本

2022-01-26