CBM 1105-1982
油仓空气管头
Air pipe heads for oil tank
CB/T 4370-2015
油舱透气管防溢装置
Air pipe anti-spill device for oil tank
2015-10-10
GB/T 24912-2015
罐式叠压给水设备
Additive pipe pressure water supply devices for columned tank
2015-07-03
NB/T 34034-2016
空气源热泵热水器搪瓷储热水箱
Water storage tank with enamel interior for air-source heat-pump water heaters
2016-08-16
RP-1185
Thermal Performance of Single Pipe Diffusers in Stratified Chilled Water Storage Tanks
分层蓄冷水箱中单管扩散器的热性能
SL/T 70-1994
微灌用聚乙烯（PE）管道沿程水头损失试验方法
Test method of water head loss of polyethylene (PE) pipe line for micro-irrigation
1994-04-06
SL-90-09-2
Water Storage Tank Size Requirements for Residential Heat Pump/Air-Conditioner Desuperheater Heat Recovery
家用热泵/空调减温器热回收储水箱尺寸要求
AS 2845.2-2010[ Pending Revision ]
Water supply - Backflow preventions devices, Part 2: Registered air gaps and registered break tanks
供水.防回流装置.第2部分:注册气隙和注册破舱
2010-06-30
GB/T 26973-2011
空气源热泵辅助的太阳能热水系统（储水箱容积大于0.6m3）技术规范
Specification of solar water heating systems assisted with air-source heat pump(for capacity of water tank more than 0.6 m3)
2011-07-19
MIL MIL-F-15919D
FILTER, AIR, ACTIVATED CARBON, SUBMARINE SANITARY TANK VENT AND WATER CLOSET (SUPERSEDING MIL-F-15919C)
过滤器、空气、活性炭、潜艇卫生水箱通风口和抽水马桶（取代MIL-F-15919C）
1971-11-08
BS ISO 21963-2020
Ships and marine technology. Marine environment protection. Tanks and piping systems for facilitating 5 ppm oil-water separation
船舶和海洋技术 海洋环境保护 促进5 ppm油水分离的储罐和管道系统
2020-09-22
KS V ISO 21963
선박 및 해양기술 — 해양환경보호 — 5×10-6(5 ppm) 유수분리를 위한 탱크 및 배관 장치
船舶和船舶技术 - 海洋环境保护 - 用于促进固定海上近海结构油水分离的油罐和管道系统
2025-02-20
GB/T 43124-2023
船舶与海洋技术 海上环境保护 5 ppm油水分离用储罐和管路系统
Ships and marine technology—Marine environment protection—Tanks and piping systems for facilitating 5 ppm oil-water separation
2023-09-07
ISO 21963-2020
Ships and marine technology — Marine environment protection — Tanks and piping systems for facilitating 5 ppm oil-water separation
船舶和船舶技术 - 海洋环境保护 - 用于促进固定海上近海结构油水分离的油罐和管道系统
2020-09-18
MIL MIL-T-53048C
TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS (SUPERSEDING MIL-T-53048B)
坦克 织物 可折叠；气柱支撑 开放式顶部 储水3000加仑（取代MIL-T-53048B）
1991-10-29
SL-08-010
Hot Water Distribution System Piping Heat Loss Factors, Both In Air and Buried - Phase II Test Results
空气和埋地热水分配系统管道热损失系数.第二阶段试验结果
MIL MIL-S-50001B
SHOWER UNIT, SAFETY, ROCKET PROPELLANT NEUTRALIZER, 100 GALLON WATER TANK, AND TWO AIR CYLINDERS, W/HEATING PROVISIONS. (NO S/S DOCUMENT) (SUPERSEDING MIL-S-50001A)
淋浴装置、安全装置、火箭推进剂中和器、100加仑水箱和两个气缸 带加热装置 （无S/S文件）（取代MIL-S-50001A）
1978-07-12
PIP PN12CS1G01
Piping Material Specification 12CS1G01 Class 125, Carbon Steel, Grooved, 0.063" C.A. Utility (Air and Water), Category D Roll Grooved Joints [Complete Revision]
管道材料规范12CS1G01 125级0.063“C.A.公用工程（空气和水）带槽碳钢D类滚槽接头[完整修订]
2019-01-01