现行 JB/T 6385-2007
锥密封焊接式压力表管接头 锥密封焊接式压力表管接头 Welding cone couplings pressure-gauge couplings
发布日期:2007-03-06
实施日期:2007-09-01
分类信息
研制信息

归口单位: 机械工业冶金设备标准化技术委员会

起草单位: 西安重型机械研究所

起草人: 刘勇

标准简介

本标准规定了锥密封焊接式压力表管接头的型式与尺寸和技术条件。本部分适用于以油、气为介质管路系统中锥密封焊接式压力表管接头。公称压力PN≤31.5MPa,工作温度-25℃~+80℃

相似标准/计划/法规
JB/T 6383.1-2007
锥密封两端焊接式直通管接头
Welding cone couplings straight weld-on couplings
2007-03-06
JB/T 6383.2-2007
锥密封焊接式直角管接头
Welding cone couplings elbow couplings
2007-03-06
JB/T 6383.3-2007
锥密封焊接式三通管接头
Welding cone couplings equal T couplings
2007-03-06
JB/T 6384.1-2007
锥密封焊接式隔壁直角管接头
Welding cone couplings angular bulkhead couplings
2007-03-06
JB/T 6384.2-2007
锥密封焊接式隔壁直通管接头
Welding cone couplings straight bulkhead couplings
2007-03-06
JB/T 6386-2007
锥密封焊接式管接头 技术条件
Specification of welding cone couplings
2007-03-06
JB/T 6381.1-2007
锥密封焊接式 直通管接头
Welding cone couplings straight male stud couplings
2007-03-06
JB/T 6382.1-2007
锥密封焊接式90弯管接头
Welding cone couplings 90° degree syphon male stud couplings
2007-03-06
JB/T 6144.5-2007
锥密封胶管总成 焊接锥接头
Rubber hose assembly with sealing cone--Welding cone coupling
2007-03-06
GB/T 5645-2008
Flared couplings—Connector for pressure gauge
2008-05-07
GB/T 5645-2008
扩口式压力表管接头
Flared couplings - Connector for pressure gauge
2008-05-07
JB/T 6381.2-2007
锥密封焊接式 直通55非密封管螺纹管接头
Welding cone couplings straight male stud couplings with G-type pipe threads
2007-03-06
JB/T 6381.4-2007
锥密封焊接式 直通60密封管螺纹管接头
Welding cone couplings straight male stud couplings with NPT-type pipe threads
2007-03-06
JB/T 6381.3-2007
锥密封焊接式 直通55密封管螺纹管接头
Welding cone couplings straight male stud couplings with R-type pipe threads
2007-03-06
JB/T 6382.2-2007
锥密封焊接式55非密封管螺纹90弯管接头
Welding cone couplings 90 degree syphon male stud couplings with G-type pipe threads
2007-03-06
JB/T 6382.4-2007
锥密封焊接式60密封管螺纹90弯管接头
Welding cone couplings 90 degree syphon male stud couplings with NPT-type pipe threads
2007-03-06
JB/T 6382.3-2007
锥密封焊接式55密封管螺纹90弯管接头
Welding cone couplings 90 degree syphon male stud couplings with R-type pipe threads
2007-03-06
MIL MS24357A Notice 3-Validation
Flange, Drogue Cone - Type MA-2 Reception Coupling, Flight Pressure Refueling, Outline Dimensions for
飞行压力加油用MA-2型接收管接头锥法兰外形尺寸
2008-02-29
MIL MS24354A Notice 2-Validation
Drogue Cone, Nozzle and Reception Coupling - Type MA-2 Flight-Pressure-Refueling System, Assembly of
锥锥、喷嘴和接收联轴器-MA-2型飞行压力加油系统 组件
2008-02-29
MIL MS24357B
Flange, Drogue Cone - Type MA-2 Reception Coupling, Flight Pressure Refueling, Outline Dimensions for
飞行压力加油用MA-2型接收管接头锥法兰外形尺寸
2016-04-18
焊接管接头密封

最后更新时间 2025-08-31