现行 JB/T 10801.3-2007
电主轴 第3部分:数控机床用电主轴 技术条件 电主轴 第3部分:数控机床用电主轴 技术条件 High-frequency spindle--Part 3:Specifications for high-frequency spindle used in numerically controlled turning machines
发布日期:2007-10-08
实施日期:2008-03-01
分类信息
研制信息

归口单位: 全国金属切削机床标准化技术委员会

起草单位: 洛阳轴承科技股份有限公司、 济宁博特科技有限公司

起草人: 商顺德、 陈长江

标准简介

JB/T 10801的本部分规定了数控车床用电主轴设计、制造和验收的要求。本部分适用于主轴端部型式A3到A8的数控车床用电主轴(以下简称电主轴)

相似标准/计划/法规
JB/T 10801.2-2007
电主轴 第2部分:加工中心用电主轴 技术条件
High-frequency spindle--Part 2:Specifications for high-frequency spindle used in machining centres
2007-10-08
JB/T 13826-2020
电主轴 性能试验规范
High-frequency spindles-Specification of performance and test
2020-04-16
JB/T 13824-2020
电主轴 可靠性试验规范
High-frequency spindles-Reliability test specification
2020-04-16
JB/T 13825-2020
电主轴 精度保持性试验规范
High-frequency spindles-Test specifications of accuracy stability
2020-04-16
JB/T 10801.1-2014
电主轴 第1部分:术语和分类
High-frequency spindle - Part 1:Terms and classifications
2014-05-12
ISO 11228-3-2007
Ergonomics — Manual handling — Part 3: Handling of low loads at high frequency
人机工程学——手动搬运第3部分:高频低负荷搬运
2007-03-30
DL/T 1694.1-2017
高压测试仪器及设备校准规范 第1部分:特高频局部放电在线监测装置
Calibration specification for high voltage testing instruments Part 1:Ultra-high frequency partial discharge online detector
2017-03-28
YS/T 514.3-2009
高钛渣、金红石化学分析方法 第3部分:硫量的测定 高频红外吸收法
Methods for chemical analysis of high titanium slag and rutile--Part 3:Determination of sulfur content--High frequency infrared absorption method
2009-12-04
GB/T 10067.34-2015
电热装置基本技术条件 第34部分:晶体管式高频感应加热装置
Basic specifications for electroheat installations—Part 34:Transistor type high frequency induction heating installation
2015-10-09
YS/T 540.3-2018
钒化学分析方法 第3部分:碳量的测定 高频燃烧红外吸收法
Methods for chemical analysis of vanadium-Part 3:Determination of carbon content-High frequency combustion infrared absorption method
2018-10-22
IEC 61248-7-1997
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure
用于电子电信设备的变压器和电感器 - 第7部分:基于能力认可程序的高频电感器和中频变压器的分段规范
1997-06-24
DL/T 848.4-2019
高压试验装置通用技术条件 第4部分:三倍频试验变压器装置
General specification of high voltage test devices- Part 4: Triple-frequency test power supply device
2019-11-04
UNE-EN 61076-3-2001
Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -- Part 3: Rectangular connectors with assessed quality - Sectional specification.
直流、低频模拟和数字高速数据应用用连接器第3部分:经质量评定的矩形连接器分规范
2001-04-06
YS/T 710.3-2009
氧化钴化学分析方法 第3部分:硫量的测定 高频燃烧红外吸收法
Method for chemical analysis of cobalt oxide--Part 3:Determination of sulphur content--High frequency combustion-infrared absorption method
2009-12-04
HB 5220.3-2008
高温合金化学分析方法 第3部分:高频感应燃烧-红外线吸收法测定碳含量
Methods for chemical analysis of superalloys-Part 3:Determination of carbon content by high frequency induction combustion-infrared absorption method
2008-03-17
XB/T 614.3-2011
钆镁合金化学分析方法 第3部分:碳量的测定 高频-红外吸收法
Chemical analysis method of gadolinium-magnesium alloy—Part 3:Determination of carbon content—High frequency-infrared absorption method
2011-12-20
QPL QPL-31031-4
CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-31031-3)
软电缆和半硬电缆用高可靠性同轴射频插头插座通用规范(代替QPL-31031-3)
2006-10-12
GB/T 43603.3-2024
镍铂靶材合金化学分析方法 第3部分:碳含量的测定 高频红外检测法
Methods for chemical analysis of nickel-platinum target alloys—Part 3:Determination of carbon content—High frequency infrared detection method
2024-03-15
DL/T 1694.6-2020
高压测试仪器及设备校准规范 第6部分:电力电缆超低频介质损耗测试仪
Calibration specification for high voltage testing instruments —Part 6: Very low frequency dielectric loss detector for power cable
2020-10-23
YS/T 1332.3-2019
粗制铜钴原料化学分析方法 第3部分:硫含量的测定 高频燃烧-红外光谱法
Methods for chemical analysis of crude copper and cobalt raw materials-Part 3:Determination of sulfur content-High frequency combustion with infrared spectrometry
2019-08-02
主轴用电数控机床电主轴

最后更新时间 2025-08-31