GB/T 34882-2017
钢铁件的感应淬火与回火
Induction hardening and tempering of iron and steel parts
2017-11-01
KS B 4902(2023 Confirm)
철강의 고주파 담금질과 템퍼링 가공
钢铁的感应加热和回火硬化
1986-09-24
JIS B 6912-2002/AMENDMENT 1-2010
Process of induction hardening and tempering of iron and steel (Amendment 1)
钢铁的感应淬火和回火工艺（修改件1）
2010-01-01
JB/T 9200-2008
钢铁件的火焰淬火回火处理
Flame hardening and tempering of iron and steel parts
2008-06-04
SAE AMS2745B
Induction Hardening of Steel Parts
钢零件的感应淬火
2024-03-12
JB/T 9204-2008
钢件感应淬火金相检验
Metallographic examination of induction hardened steel parts
2008-06-04
JB/T 8491.3-2008
机床零件热处理技术条件 第3部分：感应淬火、回火
Technical requirement heat treatment for machine tool parts--Part 3:Induction hardening and tempering
2008-06-04
JB/T 9205-2008
珠光体球墨铸铁零件感应淬火金相检验
Metallographic examination of pearlitic graphite cast iron parts induction hardened
2008-06-04
GB/T 18683-2002
钢铁件激光表面淬火
Laser surface hardening of iron and steel parts
2002-03-10
ISO 8458-3-2002
Steel wire for mechanical springs — Part 3: Oil-hardened and tempered wire
机械弹簧用钢丝Spart 3:油淬回火钢丝
2002-10-25
UNE-EN 10270-2-2002
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire.
机械弹簧用钢丝.第2部分:油淬火和回火弹簧钢丝
2002-01-25
ASD-STAN prEN 3512
Steel FE-PL1801 (100Cr6) - Vacuum induction melted and consumable electrode remelted - Hardened and tempered - Hollow bars for the manufacturer of bearings - 3,5 mm
FE-PL1801（100Cr6）钢-真空感应熔炼和自耗电极重熔-淬火和回火-轴承制造商用空心钢筋-3.5 mm<或=a<或=55mm
1999-03-31
UNE-EN 10137-3-1996
PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS. PART 3: DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS.
在淬火和回火或沉淀硬化条件下由高屈服强度结构钢制成的板材和宽扁钢 第3部分:沉淀硬化钢的交付条件
1996-05-17
BS 08/30180853 DC
BS EN 10270-2. Steel wire for mechanical springs. Part 2. Oil hardened and tempered spring steel wire
英国标准EN 10270-2 机械弹簧用钢丝 第二部分 油淬回火弹簧钢丝
2008-06-20
JIS G 1215-4-2018
Iron and steel -- Determination of sulfur -- Part 4: Infrared absorption method after combustion in an induction furnace
钢铁硫的测定第4部分:感应炉燃烧后红外吸收法
2018-01-01
DIN EN 3512-DRAFT
Draft Document - Aerospace series - Steel FE-PL1801 (100Cr6), vacuum induction melted and consumable electrode remelted, hardened and tempered - Hollow bars for the manufacturer of bearings 3.5 mm a 55 mm
文件草案.航空航天系列.FE-PL1801（100Cr6）钢 真空感应熔炼和自耗电极重熔 硬化和回火.轴承制造商用空心棒3.5mm a度55mm
1999-08-01
AS/NZS 1050.16-1994
Methods for the analysis of iron and steel, Part 16: Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
钢铁分析方法第16部分:硫含量的测定感应炉燃烧后红外吸收法
1994-08-08
ASD-STAN prEN 4090
Steel FE-PL5101 (13MoCrNiV4-4-3-1) - Vacuum induction melted and vacuum arc remelted - Carburized, hardened,sub-zero treated and tempered - Forgings - De
FE-PL5101钢（13MoCrNiV4-4-3-1）-真空感应熔炼和真空电弧重熔-渗碳、硬化、亚零度处理和回火-锻件-De<或=30 mm-315 MPa<或=Rm<或=1 650 MPa
1997-11-28
GOST R ISO 16918-1-2013
Сталь и чугун. Масс-спектрометрический метод с индуктивно связанной плазмой. Часть 1. Определение содержания олова, сурьмы, церия, свинца и висмута
钢铁 电感耦合等离子体质谱法 第一部分锡 锑 铈 铅和铋含量的测定
ASD-STAN prEN 4088
Steel FE-PL5101 (13MoCrNiV4-4-3-1) - Vacuum induction melted and vacuum arc remelted - Carburized, hardened,sub-zero treated and tempered - Bar for machining - De
FE-PL5101（13MoCrNiV4-4-3-1）型钢-真空感应熔炼和真空电弧重熔-渗碳、硬化、亚零度处理和回火-机加工用棒材-De<或=30 mm-1 315 MPa<或=Rm<或=1 650 MPa
1997-11-28