现行 SH/T 0605-2008
润滑油及添加剂中钼含量的测定 原子吸收光谱法 润滑油及添加剂中钼含量的测定 原子吸收光谱法 Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry(AAS)
发布日期:2008-04-23
实施日期:2008-10-01
分类信息
研制信息

归口单位: 中石化石油化工科学研究院

起草单位: 中国石油化工股份有限公司润滑油重庆分公司、 中国石油天然气股份有限公司大连石化分公司

起草人: 陆泽波、 李萍

标准简介

本标准规定了用原子吸收光谱法测定润滑油及添加剂中钼含量的方法。本标准适用于硫化钼(IV)添加剂及含有硫化钼(IV)添加剂的矿物油和合成油。本标准采用国际单位制[SI]单位。本标准涉及某些有危险的材料、操作和设备,但并未对此有关的所有安全问题都提出建议。因此,用户在使用本标准之前有必要建立适当的安全和防护措施,并确定相应的管理制度

相似标准/计划/法规
ASTM D3372-17(2025)
Standard Test Method for Molybdenum in Water
水中钼的标准试验方法
2025-07-01
ASTM G164-99(2023)
Standard Test Method for Determination of Surface Lubrication on Flexible Webs
测定柔性腹板表面润滑的标准试验方法
2023-11-01
ASTM D1264-24a
Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
测定润滑脂水洗特性的标准试验方法
2024-12-15
ASTM D1743-22
Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
测定润滑脂防腐性能的标准试验方法
2022-05-01
ASTM D5864-23
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
润滑剂或其组分需氧水生生物降解测定的标准试验方法
2023-11-01
ASTM D4049-25
Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
确定润滑油对水喷雾的阻力的标准测试方法
2025-07-01
GB/T 5018-2008
润滑脂防腐蚀性试验法
Standard test method for determining corrosion preventive properties of lubricating greases
2008-02-13
ASTM E1070-17a
Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
用磷钼蓝分光光度法测定铁矿石中磷的标准试验方法
2017-11-15
GB/T 3142-2019
润滑剂承载能力的测定 四球法
Standard test method for determination of load-carrying capacity of lubricants—Four-ball method
2019-03-25
DIN 51805
Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method
润滑剂的测试;润滑脂流动压力的测定 凯斯特涅法
1974-08-01
ASTM D7751-16(2021)
Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
用EDXRF分析法测定润滑油中添加剂元素的标准试验方法
2021-07-01
SH/T 0691-2000
润滑剂的合成橡胶溶胀性测定法
Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers
2000-06-05
ASTM D128-24a
Standard Test Methods for Analysis of Lubricating Grease
润滑脂分析标准试验方法
2024-07-01
ASHRAE 218-2019
Standard 218-2019 -- Method of Test for Lubricant and Refrigerant Miscibility Determination (ANSI Approved)
标准218-2019——润滑剂和制冷剂相容性测定的试验方法(ANSI批准)
KS M 2418(2021 Confirm)
석유 제품 및 윤활제의 탄소, 수소 및 질소의 기기 분석 시험방법
石油产品和润滑剂中碳、氢和氮的仪器测定的标准试验方法
2006-05-02
KS M 2418(2016 Confirm)
석유 제품 및 윤활제의 탄소, 수소 및 질소의 기기 분석 시험방법
标准试验方法碳 氢的仪器测定和氮在石油产品和润滑剂
2006-05-02
ASTM D7661-23
Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
测定个人润滑剂与天然胶乳避孕套兼容性的标准试验方法
2023-09-01
ASTM D5291-21
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
石油产品和润滑剂中碳、氢和氮的仪器测定的标准试验方法
2021-11-01
NB/SH/T 0996-2019
航空涡轮发动机润滑油相容性测定法
Test method for determining the compatibility of aircraft turbine lubricants
2019-11-04
ASTM D5183-21a
Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
用四球磨损试验机测定润滑剂摩擦系数的标准试验方法
2021-11-01
测定润滑油原子添加剂含量

最后更新时间 2025-08-31