GB/T 28-2013
六角头螺杆带孔加强杆螺栓
Hexagon fit shank bolts with split pin hole on shank
2013-06-09
GB/T 31.2-1988
六角头螺杆带孔螺栓 细杆 B级
Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
1988-06-24
DL/T 764-2014
电力金具用杆部带销孔六角头螺栓
Hexagon head bolts with split pin hole on shank for electric power fittings
2014-10-15
GB/T 31.3-1988
六角头螺杆带孔螺栓 细牙 A和B级
Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
1988-06-24
JIS B 1008-2009
Fasteners -- Bolts and studs -- Split pin holes and wire holes
紧固件螺栓和螺柱开口销孔和线孔
2009-01-01
KS B 1008(2018 Confirm)
볼트의 분할핀 구멍 및 철선 구멍
分开针孔和螺纹孔 螺钉和螺柱
2008-06-03
DIN 34803
Split pin holes and wire holes in bolts, screws and studs
螺栓、螺钉和螺柱的开口销孔和线孔
2001-11-01
KS B 1008(2023 Confirm)
볼트의 분할핀 구멍 및 철선 구멍
螺栓、螺钉和螺柱的开口销孔和线孔
2008-06-03
BS 6487-1984
Specification for split pin holes and wire holes in bolts, screws and studs
螺栓、螺钉和螺柱中的开口销孔和钢丝孔规范
1984-03-30
GOST R ISO 7378-1993
Изделия крепежные. Болты, винты и шпильки. Отверстия под шплинты и отверстия под контровочную проволоку
紧固件 螺栓 螺钉和螺柱 拆分针孔和线孔
ISO 7378-1983
Fasteners — Bolts, screws and studs — Split pin holes and wire holes
紧固件——螺栓、螺钉和螺柱——开口销孔和线孔
1983-02-01
SAE J485_201611
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
螺栓孔和螺丝柄和槽在孔脚螺母孔
2016-11-18
HB 8357-2015
GH4169带减轻孔PD杆十二角螺栓
Bolt,double hexagon-head with lightening hole,PD shank,GH4169
2015-10-10
GB/T 32.2-1988
六角头头部带孔螺栓 细杆 B级
Hexagon bolts with wire holes on head--Reduced shank--Product grade B
1988-06-24
HB 8358-2015
GH4169镀银带减轻孔PD杆十二角螺栓
Bolt,double hexagon-head with lightening hole,PD shank,silver plating,GH4169
2015-10-10
HB 8359-2015
GH4169镀银带减轻孔带2个保险丝孔PD杆十二角螺栓
Bolt,double hexagon-head with lightening hole and double head hole,PD shank,silver plating,GH41 69
2015-10-10
NASM 51110 Rev.2
SCREW, CAP, HEXAGON HEAD, FINISHED HEXAGON BOLT, SHANK DRILLED FOR COTTER PIN, CRES, PASSIVATED, UNF-2A
螺钉 盖 六角头 成品六角螺栓 开口销钻柄 CRES 钝化 UNF-2A
2016-08-31
NASM 51109 Rev.2
SCREW, CAP, HEXAGON HEAD, FINISHED HEXAGON BOLT, SHANK DRILLED FOR COTTER PIN, CRES, PASSIVATED, UNC-2A
螺钉 盖 六角头 成品六角螺栓 开口销用钻柄 CRES 钝化 UNC-2A
2016-05-31
SAE AS3115B
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS5731,.250-28 UNJF-3A
螺栓 机器 - 六角头 钻6头 PD山 CRES AMS5731 .250-28 UNJF-3A
2021-03-05
SAE AS3120B
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, UNS S66286,.5625-18 UNJF-3A
机用六角头螺栓 钻孔 PD杆 UNS S66286 .5625-18 UNJF-3A
2020-09-22