被代替 GB/T 16422.3-2014
塑料 实验室光源暴露试验方法 第3部分:荧光紫外灯 塑料 实验室光源暴露试验方法 第3部分:荧光紫外灯 Plastics—Methods of exposure to laboratory light sources—Part 3:Fluorescent UV lamps
发布日期:2014-07-08
实施日期:2014-12-01
分类信息
研制信息

归口单位: 全国塑料标准化技术委员会老化方法分技术委员会(SAC/TC 15/SC 5)

起草单位: 广州合成材料研究院有限公司、 北京燕山石油化工有限公司树脂应用研究所、 北京天罡助剂有限责任公司、 美国Q-Lab公司中国代表处

起草人: 李维义、 王浩江、 刘煜、 陈宏愿、 刘罡、 张恒

标准简介

GB/T16422的本部分规定了试样在配有荧光紫外辐射、热和水的试验设备中进行暴露的试验方法,该方法用于模拟材料在实际使用环境中暴露于日光或窗玻璃过滤后日光下发生的自然老化效果。本部分适用于在荧光紫外灯光源暴露条件下塑料的耐候性评定以及塑料间的耐候性对比试验。试样在可控条件(温度、湿度和/或水)下暴露于荧光紫外灯下,并通过不同类型荧光紫外灯来满足不同材料的试验需要。特定材料的试样制备和结果评估参考其他的国家标准。总则在 GB/T16422.1中给出。注:色漆、清漆和其他涂料的荧光紫外灯下暴露在 GB/T23987中有描述

相似标准/计划/法规
JIS K 7350-3-2008
Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
塑料实验室光源暴露方法第3部分:紫外荧光灯
2008-01-01
KS M ISO 4892-3
플라스틱-실험실 광원에 의한 폭로 시험방법-제3부:자외선 형광 램프
塑料实验室光源曝露方法第3部分:紫外荧光灯
2017-12-22
KS M ISO 4892-3(2022 Confirm)
플라스틱-실험실 광원에 의한 폭로 시험방법-제3부:자외선 형광 램프
塑料实验室光源暴露方法第3部分:紫外荧光灯
2017-12-22
GB/T 16422.3-2022
塑料 实验室光源暴露试验方法 第3部分:荧光紫外灯
Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps
2022-04-15
ISO 4892-3-2024
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
塑料实验室光源暴露方法第3部分:荧光紫外灯
2024-10-03
JIS K 7350-2-1995
Plastics -- Methods of exposure to laboratory light sources Part 2: Xenon-arc sources
塑料实验室光源暴露方法第2部分:氙弧光源
1995-01-01
BS EN ISO 4892-1-2016
Plastics. Methods of exposure to laboratory light sources-General guidance
塑料 实验室光源暴露方法
2016-05-31
KS M ISO 4892-1
플라스틱 - 실험실광원에 의한 노출 시험방법 - 제1부 : 통칙
塑料实验室光源曝露方法第1部分:总则
2017-12-22
KS M ISO 4892-1(2022 Confirm)
플라스틱 - 실험실광원에 의한 노출 시험방법 - 제1부 : 통칙
塑料实验室光源暴露方法第1部分:通用指南
2017-12-22
GB/T 16422.1-2019
塑料 实验室光源暴露试验方法 第1部分:总则
Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance
2019-12-10
BS EN ISO 4892-2-2013+A1-2021
Plastics. Methods of exposure to laboratory light sources-Xenon-arc lamps
塑料 实验室光源暴露方法
2021-08-19
BS EN ISO 4892-3-2016
Plastics. Methods of exposure to laboratory light sources-Fluorescent UV lamps
塑料 实验室光源暴露方法
2016-03-31
UNE-EN ISO 4892-3-2006
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)
塑料.实验室光源暴露方法.第3部分:荧光紫外线灯(ISO 4892-3-2006)
2006-12-20
KS M ISO 4892-2
플라스틱-실험실 광원에 의한 폭로 시험방법-제2부:제논-아크 램프
塑料实验室光源曝露方法第2部分:氙弧灯
2017-12-22
KS M ISO 4892-2(2022 Confirm)
플라스틱-실험실 광원에 의한 폭로 시험방법-제2부:제논-아크 램프
塑料实验室光源暴露方法第2部分:氙弧灯
2017-12-22
GB/T 16422.2-2022
塑料 实验室光源暴露试验方法 第2部分:氙弧灯
Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps
2022-04-15
ISO 4892-2-2013
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
塑料制品;实验室光源暴露方法Spart 2:氙弧灯
2013-02-28
ISO 4892-1-2024
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance and requirements
塑料实验室光源暴露方法第1部分:一般指南和要求
2024-10-02
BS 11/30211719 DC
BS EN ISO 4892-3. Plastics. Methods of exposure to laboratory light sources. Part 3. Fluorescent UV lamps
BS EN ISO 4892-3 塑料 暴露于实验室光源的方法 第三部分 荧光紫外灯
2011-04-20
JIS K 7350-1-1995
Plastics -- Methods of exposure to laboratory light sources Part 1: General guidance (FOREIGN STANDARD)
塑料实验室光源暴露方法第1部分:通用指南(国外标准)
1995-01-01
塑料荧光光源试验方法暴露

最后更新时间 2025-09-06